Co-developed with TrolMaster, the Lumatek LED Master Controller (LUMM0110) gives you precise control of up to 100 LED fixtures across two independent zones. It automates lighting schedules, simulates sunrise and sunset, and uses live sensor data to dim or shut off lights based on room temperature. A Complete Redesign: The LED Master Controller is a ground up redesign of the Lumatek Control Panel Plus 2.0. The old unit saw reports of LCD screen failures, including fading pixels over time. This new version does away with that display entirely, along with the reliability issues that came with it.Features: Dimming in 1% increments Digital timing, safety control and automation Temperature based room maintenance Sunrise and sunset simulation Controls up to 400 ballasts Memory backup, so your settings survive a power cut Specifications Product Code LUMM0110 Power Adaptor 100 to 240V AC, 50/60Hz Power Dimming Range OFF, 20 to 100% Power Regulation Steps 1% Sensors 2-in-1 Temperature and Humidity Temperature Range 0 to 59 degrees C Humidity Range 5 to 95% Sunrise / Sunset Range 0 to 30 minutes Nominal Working Temperature Environment 0 to 50 degrees C What's Included: 1 x Lumatek LED Master Controller 1 x 12V DC Power Supply 2 x 2-in-1 Temperature and Humidity Sensor (5m) 2 x RJ12 to LLT Cable (5m) 1 x Manual Compatible With: Works across the full Lumatek LED Grow Lights range, including the Zeus Pro and ATS Pro series.FAQs How many lights can it run? Up to 100 LED fixtures across 2 zones, and up to 400 ballasts total depending on configuration. Does it replace the Control Panel Plus 2.0? Yes, this is the redesigned successor, built to resolve the LCD reliability issues seen on that model. What sensors are included? Two 2-in-1 temperature and humidity sensors, one per zone, each on a 5m cable. Does it keep my settings if the power cuts out? Yes, memory backup retains your programmed settings. See the full range in Lumatek LED Grow Lights.
