Ideal for adding subtle decorative effects and indirect lighting to any craft, ECLIPSE Strip Lights can be seamlessly integrated into gunwales, under furniture, behind ceiling panels, and more while remaining mostly hidden. Available in dual color blue and white, single color blue or white and RGB, and in three versatile sizes—1m, 2.5m, and 5m—these lights offer incredible flexibility. Lumishore’s high-quality, high-output ECLIPSE Strip Lights are fully encapsulated, potted, and water-resistant, ensuring durability and performance in any setting. Features ECLIPSE Collection Dual Color - Dual - White and Blue Warranty Specifications Specification Value Available Colors Blue and White (5000k) Led Type/Density 60 Blue Leds per meter, 60 White Leds per meter Customer Control Options on/off switch or Eclipse Command Center Mechanical Installation Cut to Length and Seal the Cut End Before Installation. Plug and Play Electrical Installation Simple 2 Wire Installation Supply Voltage Range 12V DC Only (10 - 15V DC) Max Current Draw Per Meter (12/24V DC) 0.5A (6W/m) Ingress Protection IP68 Cross Section (Strip) 10.8mm X 4.0mm (0.425” X 0.157”) Lengths Available 1m, 2.5m and 5m (Cut and Seal) Construction Fully Encapsulated and Potted Downloads FAQs How far apart should mounting fasteners/clips be spaced for outdoor or wet installs?For outdoor installation, wet areas, or tight bends, fasteners should be used in addition to adhesive and placed every 250–300mm apart and/or on either side of the bend. Do I need to disconnect the boat battery/power before installation?Yes. Isolate/disconnect the vessel’s power source and battery before installing the strip light. For a dual-color install on a switch, where should the switch be connected?For the dual-color strip switch connection, the guide notes the switch connects to the negative wires of the strip light. For outdoor or wet installations, is adhesive alone enough?For outdoor installation, wet areas, or tight bend radii, the guide recommends using mechanical fasteners in addition to the adhesive layer. Are there location limitations regarding direct sunlight?Yes. Even though the material is UV resistant, it should not be installed in areas of strong direct sunlight. Any handling tips to avoid damaging the LEDs during install?Yes. Uncoil carefully and don’t apply pressure over the LEDs—press the edge of the strip only. Why must the adhesive backing be removed before sealing the cut end?If the adhesive backing isn’t properly removed at the end being sealed, it may compromise watertight properties and risk voiding warranty. How should I prep the mounting surface for the adhesive backing?Thoroughly clean the mounting surface using IPA and ensure it is dust and dirt free before applying the strip. Where should I avoid placing mounting fasteners relative to the LEDs?Don’t position fasteners in line with the LEDs for best results. After fitting the end cap, how long should sealant cure?After fitting the end cap with silicone adhesive, allow it to cure for 24 hours before handling. Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "How far apart should mounting fasteners/clips be spaced for outdoor or wet installs?", "acceptedAnswer": {"@type": "Answer", "text": "For outdoor installation, wet areas, or tight bends, fasteners should be used in addition to adhesive and placed every 250–300mm apart and/or on either side of the bend."}}, {"@type": "Question", "name": "Do I need to disconnect the boat battery/power before installation?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. Isolate/disconnect the vessel’s power source and battery before installing the strip light."}}, {"@type": "Question", "name": "For a dual-color install on a switch, where should the switch be connected?", "acceptedAnswer": {"@type": "Answer", "text": "For the dual-color strip switch connection, the guide notes the switch connects to the negative wires of the strip light."}}, {"@type": "Question", "name": "For outdoor or wet installations, is adhesive alone enough?", "acceptedAnswer": {"@type": "Answer", "text": "For outdoor installation, wet areas, or tight bend radii, the guide recommends using mechanical fasteners in addition to the adhesive layer."}}, {"@type": "Question", "name": "Are there location limitations regarding direct sunlight?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. Even though the material is UV resistant, it should not be installed in areas of strong direct sunlight."}}, {"@type": "Question", "name": "Any handling tips to avoid damaging the LEDs during install?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. Uncoil carefully and don’t apply pressure over the LEDs—press the edge of the strip only."}}, {"@type": "Question", "name": "Why must the adhesive backing be removed before sealing the cut end?", "acceptedAnswer": {"@type": "Answer", "text": "If the adhesive backing isn’t properly removed at the end being sealed, it may compromise watertight properties and risk voiding warranty."}}, {"@type": "Question", "name": "How should I prep the mounting surface for the adhesive backing?", "acceptedAnswer": {"@type": "Answer", "text": "Thoroughly clean the mounting surface using IPA and ensure it is dust and dirt free before applying the strip."}}, {"@type": "Question", "name": "Where should I avoid placing mounting fasteners relative to the LEDs?", "acceptedAnswer": {"@type": "Answer", "text": "Don’t position fasteners in line with the LEDs for best results."}}, {"@type": "Question", "name": "After fitting the end cap, how long should sealant cure?", "acceptedAnswer": {"@type": "Answer", "text": "After fitting the end cap with silicone adhesive, allow it to cure for 24 hours before handling."}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]}
