Lumishore EOS-LUX Command Center

SailRACE Verified independent store

→

The key to controlling your LUX above water lights and EOS underwater lights directly from your MFD, smart device and/or optional Display.Simple to set up and use, owners can contr ol the lights by zone and create lighting scenes to match any mood. An input for “triggers” allows for programable lighting events personal to you. Simply connect the Command Center with a plug-&-play cable, and smart control for your lighting fixtures will appear automatically. The Over-the-Air feature allows software updates for new features and improvements, by connecting to a laptop or PC via Wi-Fi. Required for all LUX above water lights and EOS Series lights (excl. SMX93). ** EOS-LUX Command Center Upgrade ** Setup and user guide Features Control 3 Year Warranty Full Color CRGBW Full Color Specifications Specification Value Supply Voltage Range 10.5 - 31 V DC Max Current Draw 12/24V 0.5 A MFD Compatibility Selected Garmin, Raymarine, Simrad, B&G, Furuno, Lowrance, Johnson Outdoors models (check model compatibility before purchase) Reverse Polarity Protection Yes Load Dump Protection Yes Ingress Protection Rating IP67 Zone Control Yes Scenes Yes RGB Spectrum Color Select Yes White Colour Temperature Balance (Warm to Cold) Yes Lumishore Preset Colors Yes Lights Synchronised Yes Color Cycle Yes Cycle Speed Adjust Yes Color Sweep Yes Color Sweep Speed Adjust Yes Color Pallette Yes Fixed Strobe Yes Strobe Mode Yes Light Discovery and Set up Yes Diagnostic Function Yes Sound to Light Yes Over the Air Firmware Updates Yes System Settings Backup and Restore Yes Downloads FAQs What should I do before starting installation?Isolate the vessel power and disconnect the battery before installation. Which MFD port should be used when connecting the Command Center?Use an MFD manufacturer-specific network expansion port (per your MFD installation guide or dealer advice). Is professional installation recommended?Yes. The documentation states a qualified professional should carry out the electrical and mechanical installation. How do I terminate the DMX chain?Terminate the installation by plugging a DMX Terminator into the last light/driver/hub/module in the series. What cable is specified for Simrad & B&G MFD installation?The instructions specify using the Navico conversion cable: “PN: 60-0373.” When do I need to run the initial setup process?Setup is only performed upon initial installation, or after a system SD card change. How do I waterproof the Ethernet connection at the Command Center?Use the field install RJ45 IP67 cover supplied by Lumishore to make the connection to the Command Center waterproof. How is the Command Center connected into the DMX chain?It plugs into the first Driver, Hub, or Light Module in the series. What cable is used for direct connection to the Lumishore Display?For direct connection to the Lumishore Display, use a standard ethernet network cable (Cat5e). Do I need to fuse the Command Center/lighting system circuit?Yes. Protect the system using a suitable fuse or circuit breaker. Can I cut or extend the DMX link cable?No. Use DMX extension cables to link devices; do not cut or extend the DMX link cable. What lighting systems is the EOS-LUX Command Center designed to be used with?It’s specified for Lumishore EOS underwater systems and Lumishore LUX above-water systems, including “All SMX, THX and TIX EOS underwater lighting systems” and “All LUX Lighting above water systems.” Who do I contact for help with installation, servicing or advice?Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase. {"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "What should I do before starting installation?", "acceptedAnswer": {"@type": "Answer", "text": "Isolate the vessel power and disconnect the battery before installation."}}, {"@type": "Question", "name": "Which MFD port should be used when connecting the Command Center?", "acceptedAnswer": {"@type": "Answer", "text": "Use an MFD manufacturer-specific network expansion port (per your MFD installation guide or dealer advice)."}}, {"@type": "Question", "name": "Is professional installation recommended?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. The documentation states a qualified professional should carry out the electrical and mechanical installation."}}, {"@type": "Question", "name": "How do I terminate the DMX chain?", "acceptedAnswer": {"@type": "Answer", "text": "Terminate the installation by plugging a DMX Terminator into the last light/driver/hub/module in the series."}}, {"@type": "Question", "name": "What cable is specified for Simrad & B&G MFD installation?", "acceptedAnswer": {"@type": "Answer", "text": "The instructions specify using the Navico conversion cable: “PN: 60-0373.”"}}, {"@type": "Question", "name": "When do I need to run the initial setup process?", "acceptedAnswer": {"@type": "Answer", "text": "Setup is only performed upon initial installation, or after a system SD card change."}}, {"@type": "Question", "name": "How do I waterproof the Ethernet connection at the Command Center?", "acceptedAnswer": {"@type": "Answer", "text": "Use the field install RJ45 IP67 cover supplied by Lumishore to make the connection to the Command Center waterproof."}}, {"@type": "Question", "name": "How is the Command Center connected into the DMX chain?", "acceptedAnswer": {"@type": "Answer", "text": "It plugs into the first Driver, Hub, or Light Module in the series."}}, {"@type": "Question", "name": "What cable is used for direct connection to the Lumishore Display?", "acceptedAnswer": {"@type": "Answer", "text": "For direct connection to the Lumishore Display, use a standard ethernet network cable (Cat5e)."}}, {"@type": "Question", "name": "Do I need to fuse the Command Center/lighting system circuit?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. Protect the system using a suitable fuse or circuit breaker."}}, {"@type": "Question", "name": "Can I cut or extend the DMX link cable?", "acceptedAnswer": {"@type": "Answer", "text": "No. Use DMX extension cables to link devices; do not cut or extend the DMX link cable."}}, {"@type": "Question", "name": "What lighting systems is the EOS-LUX Command Center designed to be used with?", "acceptedAnswer": {"@type": "Answer", "text": "It’s specified for Lumishore EOS underwater systems and Lumishore LUX above-water systems, including “All SMX, THX and TIX EOS underwater lighting systems” and “All LUX Lighting above water systems.”"}}, {"@type": "Question", "name": "Who do I contact for help with installation, servicing or advice?", "acceptedAnswer": {"@type": "Answer", "text": "Contact the SailRACE team — as certified marine experts we're happy to help with product selection, installation and after-sales servicing, before and after your purchase."}}]} Show more