Lynx Anti-Spark Switch

Repeat Robotics Verified independent store

→

There are a few important things that make the lynx switch unique. It must be fully unscrewed until it is topped out for the off position. Like normal switches, it must be complete ly tightened down for the full on position. However, this switch adds an intermediate pre-charge position that it should not stay in for long. The Lynx Switch adds all this capability while only measuring 6x14x14mm. It features an extra-long output tab that acts as a buss bar, large enough to solder multiple wires to. WARNING: Running a bot in the intermediate pre-charge state will burn out the pre-charge resistor. Also, when turning off the switch, unscrew it until you feel resistance. Too much torque in the unscrewed position can strip out the threads. Specs: Driver size: 2.5mm hex Weight: 3 grams Dimensions: case: 6mm x 14mm x 14mm Case+tabs: 6mm x 14mm x 22mm Mount Hole diameter: 2.5mm Mount Hole center-to-center: 10mm ΔT=5°c after 3 minutes at 24V and 13.2A constant ΔT=6°c after 3 minutes at 24V and 19.4A constant Assembly instructions: Remove oxidation from contacts with sandpaper. Solder the battery negative to the top short tab and insulate the connection. Solder the wires from the ESCs to the long bottom tab. Ensure the screw is unscrewed and in the off position before plugging in your battery. 3D Model: https://grabcad.com/library/lynx-switch-1 Show more