DescriptionGrove to 4P is a compact Grove expansion connector for extending the pins of an HY2.0-4P interface. This adapter helps connect sensors or small modules that require DuPont wires while keeping the Grove side of the build easy to route.The Grove to 4P board exposes the four-pin Grove connection in a pin-extension layout, making it useful as a DuPont wire connector for quick testing, repair work, and breadboard-style wiring. The board is simple to place in a project because it adds access to the signal pins without adding firmware requirements.For labs, classrooms, and hardware benches, this connector provides a repeatable way to bridge Grove wiring and DuPont leads. The DuPont wire connector format is especially helpful when a sensor, jumper harness, or measurement point needs direct pin access from a Grove cable path.Features Grove to 4P connector for extending a Grove HY2.0-4P interface Grove expansion connector layout with four exposed pins DuPont wire connector use for sensors, jumpers, and test leads 2.5mm pin pitch for straightforward pin-extension wiring Ten-piece pack for classrooms, labs, repairs, and repeated prototypes Passive hardware adapter with no firmware setup required Specifications Pin Pitch 2.5mm Size per Piece 25.3 x 10.3 x 1.0mm Weight per Piece 12.3g Package Size 136.0 x 92.0 x 12.0mm Gross Weight 124.0g Applications Pin-extension wiring between Grove cables and DuPont jumper leads Grove expansion connector use in sensor evaluation and bench testing DuPont wire connector setups for classroom electronics experiments Temporary pin access for debugging, repair, and measurement work Prototype harnesses that need a clean Grove-to-pin transition Product List10 x Grove to 4POther ContentThe adapter should be treated as a passive pin-extension adapter. It does not convert voltage levels, change signal protocols, or manage bus addressing, so connected devices should be electrically compatible before use.When using the Grove expansion connector as a DuPont wire connector, check the pin order before connecting sensors or jumper wires. This helps keep power, ground, and signal lines aligned during prototyping.Resources Product documentation Model size PDF FAQWhat is Grove to 4P used for?Grove to 4P extends a Grove HY2.0-4P interface into accessible pins so sensors or small modules can be connected with DuPont wires.Does this Grove expansion connector need software?No. This Grove expansion connector is a passive wiring adapter and does not require firmware, drivers, or software configuration.Can it be used as a DuPont wire connector for testing?Yes. It is useful as a DuPont wire connector for bench testing, jumper-wire access, and quick sensor evaluation.How many pieces are included?The pack includes 10 x Grove to 4P connectors.
