DescriptionThe M5Stack M5StampC5 Module with 2.54 Header Pin is a compact ESP32-C5 wireless IoT module for dual-band Wi-Fi 6, BLE 5, and IEEE 802.15.4 applications. Based on the Espressif ESP32-C5HF4, it provides a RISC-V 32-bit single-core processor up to 240MHz for Zigbee, Thread, Matter-adjacent gateways, sensor nodes, and small embedded controllers.The M5StampC5 DIP combines USB Type-C, 3.7V battery input, IPEX-1 antenna connector, 0.5mm-12P FPC expansion, and 2.54mm pad pitch in a very small module. For ESP32-S3 Stamp projects, the M5Stack M5StampS3 Module is a related option; for simple ESP32 IoT prototypes, the M5Stack ATOM Lite is another compact M5Stack controller.With 4MB Flash, 384KB SRAM, 19 GPIOs, charging IC, and status LEDs, the M5Stack Stamp-C5 DIP is useful for prototyping, custom carrier boards, battery-powered sensing, wireless controllers, and small production devices.Features ESP32-C5HF4 RISC-V 32-bit single-core processor, up to 240MHz. 2.4GHz and 5GHz dual-band Wi-Fi 6 for modern IoT networks. BLE 5 plus IEEE 802.15.4 support for Zigbee and Thread applications. 4MB Flash and 384KB SRAM according to official M5Stack specifications. USB Type-C, DC 3.7V battery input, IPEX-1 antenna connector, and 0.5mm-12P FPC. 2.54mm pad pitch and 2 x 2.54-7P headers for fast breadboard and carrier-board prototyping. SGM40567-4.2XG/TR charging IC, red charging indicator, and blue G28/BOOT indicator. Deep-sleep power consumption of 3.7V at 13uA according to M5Stack. Specifications OpenELAB SKU M5-S016-DIP Official SKU S016-DIP Product Name M5StampC5 Module with 2.54 Header Pin Product Type ESP32-C5 wireless IoT module SoC ESP32-C5HF4, RISC-V 32-bit single-core, up to 240MHz SRAM 384KB Flash 4MB Wi-Fi 2.4 and 5GHz dual-band Wi-Fi 6 Bluetooth BLE 5 IEEE 802.15.4 Zigbee, Thread USB USB Type-C Battery Input DC 3.7V Antenna IPEX-1 GPIO 19 GPIO total, 11 pad GPIO plus 8 FPC GPIO Pad GPIO G1, G2, G3, G4, G5, G6, G7, G8, G9, G10, G28 FPC GPIO G23, G0, G24, G25, G26, G27, G11, G12 Pad Pitch 2.54mm Rear Expansion FPC 0.5mm-12P Charging Current Approx. 200mA Deep Sleep 3.7V at 13uA Product Size 17.6 x 19.1 x 3.4mm Product Weight 2.4g Package Size 138.0 x 93.0 x 8.0mm Gross Weight 7.4g Applications Dual-band Wi-Fi 6 IoT devices and compact edge nodes. Zigbee/Thread end devices, sensor nodes, and smart-home prototypes. Battery-powered measurement, control, and data-logging boards. Custom carrier boards, breadboard prototypes, and small embedded products. Product List 1 x Stamp-C5 DIP module 2 x 2.54-7P pin headers Other ContentThe official M5Stack images below were uploaded as WebP files for this store. They show the pin map, mechanical dimensions, schematic, and package weight for the M5Stack M5StampC5 DIP.The official pin map identifies the 2.54mm pads, FPC GPIO pins, USB Type-C, IPEX-1 antenna connector, battery input, and status LEDs for the M5StampC5 DIP module.The mechanical drawing helps confirm the 17.6 x 19.1 x 3.4 mm module size before PCB carrier, enclosure, or fixture design.The schematic page is useful when checking power, charging, USB, antenna, and GPIO connections for a custom ESP32-C5 design.The package-weight image confirms the lightweight module format for small IoT prototypes and low-mass embedded nodes.Resources M5Stack S016-DIP documentation M5StampC5 schematic PDF M5StampC5 mechanical drawing PDF ESP32-C5 datasheet M5Stack hardware footprint FAQWhich controller does the M5StampC5 DIP use?It uses the Espressif ESP32-C5HF4 with a RISC-V 32-bit single-core processor up to 240MHz.Does this module support 5GHz Wi-Fi?Yes. The M5StampC5 DIP supports 2.4GHz and 5GHz dual-band Wi-Fi 6.Are pin headers included?Yes. The package includes two 2.54-7P pin headers.Can it be used for Zigbee or Thread projects?Yes. The official specification lists IEEE 802.15.4 support for Zigbee and Thread.Is it suitable for battery-powered designs?Yes. It includes DC 3.7V battery input, charging IC, and 13uA deep-sleep current according to M5Stack.
