DescriptionThe M5Core panel frame is a mounting accessory for fixing Core, Core2, and Tough series hosts onto a surface. It provides a clean front-panel structure for projects that need the controller secured in an enclosure, control cabinet, display panel, or installation board.This M5Core panel frame supports two installation methods: screw fastening and double-sided adhesive bonding. The frame keeps the host aligned with the panel surface, while the included dimension guide card helps mark hole positions before cutting or drilling the installation surface.The M5Core panel frame is lightweight, compact, and supplied with spacers, screws, adhesive tape, and a guide card, so it can support both temporary prototypes and more permanent device mounting work.Notice: For Tough hosts, use the included 3M waterproof double-sided tape when a water-resistant barrier is needed. For Core hosts, insert the four plastic spacers into the frame corners so the device surface sits flush with the M5Core panel frame.Features M5Core panel frame for Core, Core2, and Tough series host mounting Supports screw fastening or double-sided adhesive bonding Included 3M waterproof tape helps Tough host installations keep a water-resistant contact layer Plastic spacers help Core hosts sit parallel with the frame surface Dimension guide card assists with marking panel holes before installation Small 72.0 x 64.0 x 18.4mm frame size for embedded and enclosure projects Complete hardware set with screws, spacers, adhesive tape, and guide card Specifications Compatible Host Series Core, Core2, and Tough series hosts Mounting Methods Screw fastening or double-sided adhesive bonding Adhesive Tape Pre-cut 3M waterproof double-sided tape Spacer Use Four plastic spacers for flush Core host installation Product Size 72.0 x 64.0 x 18.4mm Product Weight 6.7g Package Size 170.0 x 120.0 x 18.0mm Gross Weight 20.9g Applications M5Core panel frame mounting for control panels and display boards Embedded device front-panel installation for Core, Core2, and Tough hosts Workshop jigs, demo fixtures, and teaching equipment Cabinet, enclosure, and machine-panel projects that need a secured host controller Water-resistant Tough host mounting when used with the included 3M adhesive tape Product List 1 x Panel Frame 1 x Plastic Spacers (4 pieces included) 2 x Pre-cut 3M Waterproof Double-sided Tape 1 x Dimension Guide Card 4 x M3 x 16 Stainless Steel Hex Screws 2 x M3 x 14 Stainless Steel Hex Screws Other ContentBefore installing the M5Core panel frame, place the host and frame on the target surface and confirm the display, buttons, ports, and cable route remain accessible. Use the guide card to mark the surface, then choose drilling, cutting, or adhesive mounting according to the panel material.For Core host installations, fit the plastic spacers first and check that the front surface is level with the frame. For Tough host installations, clean the mounting surface before applying the waterproof tape so the M5Core panel frame bonds evenly.Resources Panel Frame documentation Panel Frame size drawing PDF FAQWhat is this frame used for?It is used to mount Core, Core2, and Tough series hosts onto a panel, cabinet, enclosure, or installation board.Can the M5Core panel frame be installed without screws?Yes. The package includes pre-cut 3M waterproof double-sided tape, so adhesive bonding can be used when screws are not preferred.Why are plastic spacers included?The spacers are used with Core hosts to keep the device surface flush and parallel with the frame surface.Is it suitable for Tough host mounting?Yes. Tough hosts can be mounted with the supplied waterproof adhesive tape to help maintain a water-resistant contact layer.What comes in the package?The package includes the frame, four plastic spacers, two pre-cut 3M waterproof adhesive tapes, one dimension guide card, and six stainless steel hex screws.
