DESCRIPTION Tab5 is a highly expandable, portable smart-IoT terminal development device for developers, integrating a dual-core architecture and rich hardware resources. The main controller adopts the ESP32-P4 SoC based on the RISC-V architecture, with 16MB Flash and 32MB PSRAM. The wireless module uses the ESP32-C6-MINI-1U, supporting Wi-Fi 6. Its antenna system can freely switch between the built-in 3D antenna and an external MMCX antenna interface, flexibly adapting to various deployment environments to ensure data throughput and low-latency control. In terms of visual and interactive experience, the Tab5 is equipped with a 5″ 1280×720 IPS touchscreen featuring an MIPI‑DSI interface, delivering a smooth and responsive touch interaction. It also comes with an SC2356 2MP camera (1600×1200) that uses an MIPI‑CSI interface, enabling HD video recording, image processing, and edge AI applications such as facial recognition and object tracking. Peripheral interfaces include USB Type-A (Host) and USB Type-C (USB 2.0 OTG) for mouse, keyboard and other devices. Industrial users can leverage RS-485 (SIT3088 + switchable 120Ω terminator). HY2.0-4P, M5-Bus, GPIO_EXT headers, a microSD slot, and reserved STAMP pads (for Cat-M, NB-IoT, LoRaWAN, etc.) enable versatile sensor and communication expansion. Reset/Boot buttons provide quick reset and download-mode entry. Audio features consist of an ES8388 codec plus an ES7210 AEC front-end, a dual-mic array, 3.5mm headphone jack and speaker, supporting Hi-Fi recording/playback and accurate voice recognition. A BMI270 6-axis sensor (accelerometer + gyroscope, interrupt wake-up) can wake the MCU in motion-tracking scenarios, boosting response efficiency in low-power mode. For time and power, Tab5 integrates an RX8130CE RTC (timed interrupt wake-up). The base accepts a removable NP-F550 Li-ion battery and features MP4560 buck-boost, IP2326 charge management, and INA226 real-time monitoring for stable standalone operation. A 1/4″-20 tripod nut on the side allows direct mounting to a tripod or bracket. Applications include smart-home control, remote monitoring, industrial automation, IoT prototyping and education, offering a full-featured, easily expandable high-performance platform. FEATURES ESP32-P4 dual-core MCU ESP32-C6 wireless module 2.4 GHz Wi‑Fi 6 Built‑in 3D antenna & MMCX external antenna port 5‑inch IPS TFT display, resolution 1280×720 (720P) SC2356 2MP camera USB Type-A Host + USB Type-C OTG RS485 industrial interface HY2.0-4P & M5-Bus expansion microSD card slot Stamp expansion pads ES8388 audio codec ES7210 AEC dual microphones 1W speaker + 3.5mm headphone jack BMI270 6-axis sensor RX8130CE real-time clock Reset/Boot & Power keys Removable NP-F550 battery Standard 1/4″-20 tripod-mount nut Development Platform UiFlow2 Arduino IDE ESP-IDF PlatformIO APPLICATIONS IoT Device Development Smart Home Control Remote Monitoring Systems Industrial Automation TECHNICAL DETAILS Main Controller SoC: ESP32-P4NRW32@RISC-V 32-bit Dual-core 400MHz + LP Single-core 40MHz Wireless Module SoC: ESP32-C6-MINI-1U Flash: 16MB PSRAM: 32MB Wi-Fi: 2.4 GHz Wi-Fi 6, Thread, ZigBee Antenna: Built-in 3D antenna & 2 x MMCX external antenna ports Display: Uses a 5‑inch IPS TFT display with a resolution of 1280×720 (720P), equipped with an integrated display and touch driver IC: ST7123 Camera: SC2356 @ 2MP (1600×1200), via MIPI‑CSI interface Audio Chip: ES8388 codec, ES7210 AEC front end Microphone: Dual microphone system (AEC echo cancellation) Speaker: 1W@8Ω NS4150B Headphone Jack: 3.5mm USB Ports: USB Type-A (Host), USB Type-C (USB 2.0 OTG) RS485 Port: SIT3088 (120Ω switchable terminal resistor), Power supply range: 6 ~ 24V Expansion Interface: 1× HY2.0-4P, 1× M5-Bus, GPIO_EXT expansion bus Storage Expansion: microSD card slot Extensible Stamp Interface: Stamp pads (support Cat.M / NB‑IoT / LoRaWAN and other modules) Motion Sensor: BMI270 six-axis (accelerometer + gyroscope, support interrupt wake-up) RTC: RTC Chip: RX8130CE (supports timed interrupt wake-up), RTC supercapacitor specification: 70000μF/3.3V, size Φ4.8×1.4mm Reset/Boot Button: 1x Button, for power on/off and entering download mode Charging Management: IP2326 charging management chip Real-time Power Monitoring: INA226 (bus current / voltage monitoring) Battery: NP-F550 removable lithium battery, 7.4V@2000mAh (14.8 Wh) Battery Life: Under standard usage environment (screen brightness 50%, Wi‑Fi always on, background tasks running), Tab5 built-in battery discharges from full (8.23 V) to shutdown threshold (6.0 V), lasting about 6 hours. Operating Temperature: 0 ~ 40°C Product Size: Tab5: 128.0 x 80.0 x 12.0mm, Tab5 Kit: 128.0 x 80.0 x 26.7mm Product Weight: Tab5: 124.5g, Tab5 Kit: 277.4g, Battery: 97.9g Package Size: Tab5: 148.0 x 103.0 x 21mm, Tab5 Kit: 191.0 x 103.0 x 25.0mm Gross Weight: Tab5: 162.5g, Tab5 Kit: 277.4g DOCUMENTS Documents SHIPPING LIST 1x Tab5 1x 1.25-6P Single-ended Terminal Cable 1x NP-F550 2000mAh Removable Battery
Related
Related
Related
Related