M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen. It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototying. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7%, and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products. Power switch operation： Power on ：Press power button for 2 seconds Power off ：Press power button for 6 seconds Notice: Baud rate supported by M5StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input For example, to use the G36 pin as the ADC input, Configuration the G25 pin as FLOATING setup() { M5.begin(); pinMode(36, INPUT); gpio_pulldown_dis(GPIO_NUM_25); gpio_pullup_dis(GPIO_NUM_25); } Product Features ESP32-based support BLE 4.2 and WiFi Built-in 6-Axis IMU Red LED IR transmitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lipo Battery Extendable Socket Built-in Passive Buzzer Wearable & Wall mounted Development Platform UIFlow, MicroPython, Arduino Include 1x M5StickC Plus Documents Quick Start easyloader schematic pinmap related-link example Applications Internet of things terminal controller Wearable devices Stem education product DIY creation Specification Resources Parameter ESP32 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Flash Memory 4MB Power Input 5V @ 500mA Port TypeC x 1, GROVE(I2C+I/0+UART) x 1 LCD screen 1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 Button Custom button x 2 LED RED LED MEMS MPU6886 IR Infrared transmission MIC SPM1423 RTC BM8563 PMU AXP192 Battery 120 mAh @ 3.7V Antenna 2.4G 3D Antenna PIN port G0, G25/G36, G26, G32, G33 Operating Temperature 32°F to 104°F ( 0°C to 40°C ) net weight 15g Gross weight 21g Product Size 48.2*25.5*13.7mm Package Size 65*25*15mm Case Material Plastic ( PC )
Related
Related
Related
Related