Magigoo Pro PC (50ml) – Reliable adhesion for polycarbonate Magigoo Pro PC is formulated for polycarbonate (PC) and PC‑blend filaments that are prone to warping and can be tough to stick. It supports strong first‑layer adhesion during printing and helps parts release more easily after the bed cools. Key benefits Designed for PC and PC blends to help prevent warping and detachment. Works across many common build surfaces (glass, PEI, BuildTak-type sheets, powder‑coated flex plates, Kapton and more). Water‑based cleaning with a damp cloth. How to use Apply on a clean build surface (ideally on a cool bed). Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard). Spread an even, thin coat over the active print area—make sure no spots are missed. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools. Print tips PC printing often benefits from an enclosure and stable temperatures to reduce warping. Let the bed cool before attempting removal. CleanupWipe the cooled bed with a damp cloth using just water. Safety & handling Store upright with the cap closed and away from direct sunlight. Do not squeeze aggressively; flow is controlled by the applicator valve. What’s included1 × Magigoo Pro PC pen bottle
