Description The MagPro is a handheld programming tool for addressable fire alarm detectors and protocol devices, featuring a built-in MAGPRO-DB standard base, LCD display and six-button control interface. The unit allows installers to configure device addresses, sensitivity settings and operational parameters directly at the device location without needing a laptop or panel access. Designed for fire alarm installation and commissioning, the MagPro runs on either mains power or four 1.5V AA batteries (sold separately), giving flexibility to work in live systems or pre-installation testing environments. The integrated base accepts standard addressable detectors, allowing the device to be placed in the base, programmed via the LCD menu system, then removed and installed on-site with settings retained. The programming cable connects the MagPro to compatible fire alarm panels for firmware updates and data transfer. The LCD screen displays current settings, address ranges and confirmation prompts, while the six-button interface (Esc, Up, Down, Modify, Right, Enter) navigates menus without needing external software. At 0.61kg net weight, the unit is portable enough for scaffold work and ceiling installations. Specification Materials ABS Operating Voltage 4.2 - 8V DC Back-up Power Supply 4 x 1.5V - AA Size Batteries Communication Consumption 60mA (± 5) (@6V DC) Range Of Addresses 0 - 250 Wiring Type Analogue Addressable (MAGPRO) Protocol Type Custom (Closed) Dimensions 255 x 102 x 65mm Product Net Weight 0.61KG Product Gross Weight 0.68KG Downloads Product Specification Sheet Product Manual Frequently Asked What devices can the MagPro programme? The MagPro works with addressable fire alarm detectors and protocol devices that fit the MAGPRO-DB standard base. Check the manual for the full compatibility list of supported detector models and protocols. Does it need to be connected to a fire panel to work? No. The MagPro programmes devices standalone using battery or mains power. The programming cable allows firmware updates and data transfer to panels but is not required for basic device configuration. What batteries does it take? The MagPro requires four 1.5V AA batteries for portable operation. Batteries are not included. Alternatively, it can run on mains power using the included mains adapter. Is the programming cable included? Yes. The programming cable for connecting to compatible fire alarm panels is included in the box.
