The ESP32 starter pack is the maker's secret weapon for connected projects. This kit bundles everything you need to dive into IoT, smart home automation, and wireless experimentation. With dual-core processing power, built-in 802.11 b/g/n Wi-Fi + dual-mode Bluetooth/BLE, and a generous array of general-purpose input/output (GPIO) pins supporting capacitive touch, ADCs, DACs, and interfaces like I2C, SPI, and UART. The ESP32 punches well above other similar microcontrollers in its class and price point. This pack includes selection of sensors modules and components to get you started, including environmental sensing with the DHT11 temperature and humidity module, motion detection via the HC-SR501 PIR sensor, as well as obstacle avoidance and distance sensing modules. Add the OLED display for real-time feedback, a relay module for controlling external devices, and a full complement of LEDs, switches, and resistors, and you're ready to prototype anything from weather stations to home automation controllers. The breadboard, jumper cables, and passive/active buzzers round out this assembled collection that eliminates the frustration of hunting down components. Whether you're building your first connected device or your fiftieth, this pack gets you from unboxing to blinking LEDs in minutes. Contents: 1 ESP32 Board - 4MB Flash Memory/WiFi/Bluetooth1 Mini OLED Display1 Breadboard, Full Size1 Obstacle Avoidance Module1 Photoresistor Module1 DHT11 Temperature & Humidity Module1 HC-SR501 PIR Motion Sensor Module1 HC-SR04 PING Distance Sensor Module1 Potentiometer, 10k w/Knob1 Micro-USB Cable30 Resistor Pack: 220ohm, 1K, 10k1 Passive Buzzer1 Active Buzzer1 Relay Module, 5V 2-Channel5 Pushbuttons with Colored Caps10 F-M DuPont Cable210 F-F DuPont Cables10 M-M DuPont Cables15 LEDs: Red, Green, Yellow1 LED: RGB, 4-pin Download Starter Manual
