Malco "J" Channel Cutter 1/2" – #JCC50R Create clean drain tabs, notches, and 45° miter cuts in 1/2" vinyl J-channel quickly and consistently. The Malco JCC50R makes repetitive cuts fast and accurate with minimal hand effort. Hardened all-steel construction with rust-resistant nickel chrome and black oxide finishes ensures long-lasting durability. Light hand pressure produces a click to signal a finished drain tab, while graduations on the upper jaw allow precise tab and notch depth adjustments from 3/8" to 1-1/4". The jaws can also be used to cut professional 45° miter trims. Why Contractors Choose It ✂️ Cuts drain tabs, downstream notches, and 45° miter trims in 1/2" vinyl channel ⚙️ Graduated jaws allow precise tab and notch depth from 3/8" to 1-1/4" 🛠️ Hardened all-steel construction with rust-resistant nickel chrome and black oxide finish for long service life 🤲 Ergonomic RedLine™ handles reduce hand fatigue and improve control 🔩 Compound leverage head provides 7:1 mechanical advantage for easy operation 🔄 One-hand operation with spring actuation and thumb latch for speed and comfort How To Use 1. Position the vinyl J-channel in the cutter jaws at the desired cut point. 2. Adjust using the graduations for proper tab or notch depth. 3. Squeeze the handles until a single click signals a complete cut. 4. For miter cuts, use the opposite side of the jaws to cut at a 45° angle. Additional Notes • Model: JCC50R • Channel Size: 1/2" (12.7 mm) • Cuts: Drain tabs, downstream notches, and 45° miter trims • Handles: Ergonomic RedLine™ grips with non-slip inserts • Compound leverage: 7:1 mechanical advantage • Hardened all-steel construction with nickel chrome and black oxide finishes • Package includes one tool ⚠️ California Proposition 65 Warning This product may expose you to chemicals including chromium or nickel compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
