Masonry Chimney Offset Four inches in height, offsets can be used in installations where the chimney is not completely vertical. Support is required for every 5th offset. To complete your indoor or outdoor installation, Mason-Lite offers a comprehensive line of optional accessories. From masonry accessories to our metal chimney to brick panels, we’ve got you covered Why Choose Mason-Lite: What's Included Masonry Chimney Offset 30D Not Included List of Required Components for Masonry Chimney System (Can be ordered individually or as a kit) Masonry Inner Liner Starter Masonry Outer Liner Masonry Inner Liner Masonry Chimney Crown Masonry Chimney Cap Masonry Brick Ledge MC14-AP Anchor Plate/Damper-use with Masonry Chimney Only Features The Brick ledges are designed to hold brick and stone facing for the chimney above the roofline. Used directly below roof line to surround chimney in 2" brick for the portion on the exterior of the house Offsets a vertical chimney 30°. Support is required for every 5th offset. Masonry Chimney Stack Example Specifications Item Number MCSOS-814 Product Type 30 Degrees Offset Elbow Cater Weight 90 lbs Dimensions Warranty Lifetime Limited Warranty MASON-LITE FIREPLACE Masonry Fireplaces Industries, Inc. (MFI) warrants all Mason-Lite Fireplaces to be free from defects in materials that adversely affect fireplace performance for the lifetime of the product from the date of purchase, subject to the terms and conditions of this limited warranty. MFI does not warrant accessory chimney, outside air ducts and devices not manufactured by MFI. This warranty covers only products manufactured by MFI, specifically the modular concrete firebox, and NO WARRANTY, EXPRESS OR IMPLIED, EXTENDS TO ANY OF THE HARDWARE, FOUNDATION, VENTING, DUCTS, OR ACCESSORIES. THIS WARRANTY DOES NOT COVER DRAFTING, SMOKING, OR SOOTING OF THE FIREPLACE SYSTEM. Factors beyond the manufacturer’s control affect drafting, smoking, and sooting and MFI cannot guarantee these aspects of performance. Coverage under this warranty is subject to the following conditions and exclusions: This warranty is null and void when the fireplaces are not installed pursuant to the installation instructions provided by MFI or local building codes have not been followed completely. Glass is warranted against thermal breakage only and only on models that are manufactured by MFI with a glass front. On Direct Vent models the safety glass or safety screen must be kept in front of this glass when fireplace is in use. Safety screen must be used on all models when in use. This warranty does not apply to any component or part that shows evidence of misuse, abuse, improper installation, accident or lack of regular maintenance. MFI is not responsible for misuse or mishandling of component parts. This warranty does not apply to any damage sustained to the appliance while in transit. Neither MFI, nor any affiliate thereof, is responsible for any labor costs or indirect costs incurred for the replacement of defective components. Any covered component that, in our judgment, is defective shall be repaired, replaced or refunded at MFI’s option. Nothing in this warranty makes MFI, or any affiliate thereof, liable in any respect for any injury or damage to the building or structure in which the fireplace has been installed or to the persons or property therein arising out of the use, misuse, or installation of properly manufactured MFI products. The fireplace must be used in accordance with operating instructions. The grate or andirons must be installed when using the fireplace. NEITHER MFI, NOR ANY AFFILIATE THEREOF, SHALL BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXPENSES ARISING OUT OF THE USE OF THE FIREPLACE. ALL SUCH DAMAGES AND EXPENSES ARE HEREBY EXCLUDED. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. If a component is found to be defective under the terms of this warranty, the party this warranty is extended to shall notify MFI in writing, by registered mail, within thirty (30) days following the discovery of the defect within the lifetime warranty period. The letter shall include proof of purchase and state the (1) date of purchase, model number and serial number ; (2) place of purchase; (3) address of installation; (4) name, address and phone number of the homeowner; and (5) a brief description of the defect. This warranty applies only to those fireplaces installed in the continental United States, Alaska and Canada. If any part of this warranty is found to be unenforceable, the remaining parts shall remain in force and effect. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, TERMS OR CONDITIONS, EXPRESS OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW. MFI HEREBY DISCLAIMS ALL GUARANTEES AND WARRANTIES, EXPRESS OR IMPLIED, BEYOND THE WARRANTIES SET FORTH HEREIN, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Revision date: 1/29/2015 Documents & Files Masonry Chimney Specifications Masonry Chimney Instructions (with offset) Masonry Chimney Stack Example Masonry Chimney Anchor Plate Damper Instructions 2024 Mason-Lite Catalog Videos Training Video Mason-Lite MGFP Burner and Logs Mason-Lite Brick Panel Drystack True Firebrick Panels Installation Steel Throat Damper Installation Frequently Asked Questions Can I use either metal or masonry chimney on a Mason-lite fireplace? Yes, both are approved. Is the masonry chimney the same pumice material as the Mason-Lite fireplace? Yes Can I offset masonry chimney? Yes. Special offset parts are used, and every 5th offset must be supported. What is the 4” starter piece? This is used to off-set mortar joints- just another way Mason-Lite is looking out for your safety. Can I install a fireplace on the 2nd floor using masonry chimney? No. Metal chimney is required to keep the weight at a minimum. Wood or solid fuel burning units need to have clearances to wood under pinnings using a metal base or CMU block construction. Units on a wood floor must use metal chimney and cannot use a masonry chimney system. Please check with your structural engineer to make sure there is enough support for masonry fireplace.
Related
Related
Related
Related