Cemix Masonry Mortar Mix is a mortar used in civil, commercial, industrial and residential applications. It is a mixture of sands, Portland cement and admixtures. TYPICAL USES: Used for applications including: • Brick & Block Work ADVANTAGES: • Ready to use - just add water COVERAGE: Approximate coverage per bag: - 30kg bag: 30 bricks & 24 blocks STANDARDS: Complies with NZS 4210:1989 PREPARATION: Ensure the bricks and blocks are relatively dry. MIXING: 1. Empty the bag contents into a wheelbarrow or mixer. 2. Gradually add the prescribed water, mixing thoroughly until a smooth mix is achieved. Do not over mix. Bag contents to water ratio: - 20kg: 3L to 3.3L - 30kg: 4.5L to 4.95L APPLICATION: Place a layer of 15mm to 20mm of mix between the layers of bricks or blocks. Note: The joint gaps are usually 10mm to 15mm. Pointing is easier after the mortar has initially set. DRYING & CURING: Drying time depends on the climate. In general, allow for a minimum of 24 hours at 20°C. Download the Cemix Datasheet for more information. Available at these locations: Albany Avondale Drury Eastern Bays Hamilton Eastside Silverdale Swanson Sylvia Park Warkworth
