The Master Marker is a unique layout tool for pipe and structural steel. Learn How to Use the Master Marker Featuring a New On/Off Switchable Magnet The Master Marker quickly marks pipe from 8" to 48". Magnetic base, with levels, help the operator to stabilize tool and quickly find top dead center of the pipe. Removable and completely adjustable head, with a built in level, gives the operator the ability to mark both sides of a pipe without resetting the angle because the head can rotate 360 degrees. Because the head rotates, the operator is not limited by pipe size if you need to move the base for continuous marking. The arms have spring-loaded joints for smooth and precise operation for years of trouble-free service. The Master Marker sets the standard for marking pipe saddles and structural steel layout. The Master Marker comes with a structural steel adapter and strap (for non-ferrous pipe). Levels are easily replaced if broken. There are no extra combination adapters to buy when purchasing the Master Marker as it is engineered right in the body of the tool. It is machined from quality aluminum material then anodized for lasting protection. Master Marker comes in a case with foam cut-outs for storage - a must have for the professional! Frequently Asked Questions Question: How much holding power does the on/off magnet have? Answer: 150 lbs. of power on both tools. Question: What material are tools made from? Answer: Aluminum that's anodized for protection. Question: What size or type of joint, elbow, tee or lateral or angle will the Master Marker work on? Answer: It will mark a 16" pipe or structural steel joints (H-beams, I-beans, channels, etc.) without moving and 48" if you relocate base. FOR SMALL JOBS, ORDER THE MITER MARKER. Question: Is the Master Marker furnished with a protractor and, if so, is it calibrated? Answer: The Master Marker has calibrated protractor dials. Question: Is the Master Marker furnished with triple-jointed marking arms and holder for soapstone crayon? Answer: Yes. Question: Does the Master Marker come furnished with a structural adapter that will simplify the layout of I-beams, angles and channels? Answer: Yes. Question: What degree readings will the protractor do and in what increments? Answer: The protractor will read to 90° in 2-1/2 degree increments for easy reading. Question: Will the protractor also do readings in rise-inches-per-foot? Answer: Yes. Question: Does the Master Marker come with built-in adjustable dial protractor and bubble level? If yes, what will it read up to and in what degree increments? Answer: NO! The level is stationary in the main body for top "dead center" readings and more importantly, there is a level vial in the marking arm which is on a 360 degree rotating shaft. This allows the operator to telescope out over old welds or change the angle on fittings to whatever angle is needed. Question: Does the Master Marker have web straps to hold the markers in place? Answer: The Master Marker has a Spring Buckle Strap, 1-1/2" Wide x 8' Long part number 5010 that can be ordered separate. If working with stainless steel, and the user cannot hold the tool steady enough, we do recommend using the Spring Buckle Strap. NOTE: The marking arm for the Master Marker is completely separate from the main body. This allows you to move the main magnetic body anywhere around the circumference of the pipe and re-level the marking arm. By doing this you are ready to continue marking for larger pipe. It will mark angles or simple and compound saddles on any size pipe. This main base is magnetic. The level vials and the adaptors are built in. No extras to buy! The vials (part number 5111) can be repaired easily in the field. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "How much holding power does the on/off magnet have?", "acceptedAnswer": { "@type": "Answer", "text": "150 lbs. of power on both tools." } },{ "@type": "Question", "name": "What material are tools made from?", "acceptedAnswer": { "@type": "Answer", "text": "Aluminum that's anodized for protection." } },{ "@type": "Question", "name": "What size or type of joint, elbow, tee or lateral or angle will the Master Marker work on?", "acceptedAnswer": { "@type": "Answer", "text": "It will mark a 16\" pipe or structural steel joints (H-beams, I-beans, channels, etc.) without moving and 48\" if you relocate base. FOR SMALL JOBS, ORDER THE MITER MARKER." } },{ "@type": "Question", "name": "Is the Master Marker furnished with a protractor and, if so, is it calibrated?", "acceptedAnswer": { "@type": "Answer", "text": "The Master Marker has calibrated protractor dials." } },{ "@type": "Question", "name": "Is the Master Marker furnished with triple-jointed marking arms and holder for soapstone crayon?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "Does the Master Marker come furnished with a structural adapter that will simplify the layout of I-beams, angles and channels?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "What degree readings will the protractor do and in what increments?", "acceptedAnswer": { "@type": "Answer", "text": "The protractor will read to 90° in 2-1/2 degree increments for easy reading." } },{ "@type": "Question", "name": "Will the protractor also do readings in rise-inches-per-foot?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "Does the Master Marker come with built-in adjustable dial protractor and bubble level? If yes, what will it read up to and in what degree increments?", "acceptedAnswer": { "@type": "Answer", "text": "NO! The level is stationary in the main body for top \"dead center\" readings and more importantly, there is a level vial in the marking arm which is on a 360 degree rotating shaft. This allows the operator to telescope out over old welds or change the angle on fittings to whatever angle is needed." } },{ "@type": "Question", "name": "Does the Master Marker have web straps to hold the markers in place?", "acceptedAnswer": { "@type": "Answer", "text": "The Master Marker has a Spring Buckle Strap, 1-1/2\" Wide x 8' Long part number 5010 that can be ordered separate. If working with stainless steel, and the user cannot hold the tool steady enough, we do recommend using the Spring Buckle Strap." } }] }
Related
Related