The Laurel Canyon is Matchless Amplifiers' first 20 Watt 6V6 amp! The Laurel Canyon is an American voiced amp that features a robust 3 knob tone stack that allows full control of its voicing unlike most traditional American voiced amps. From glassy full bodied cleans, to pushed overdriven rock tones, this amp can do it all at any volume with the help of it's master volume knob! The Laurel Canyon is a 20 Watt 6V6 amp with a 5AR4/GZ34 Tube rectifier. Wired in Class A with a dual push/pull output transformer. Output tubes are on a fixed resistor Cathode self –bias circuit. The Pre Amp is two 12AX7/ECC83’s, Phase Inverter 12AX7/ECC. The Laurel Canyon comes optional with Reverb and the Effects Loop is standard. Controls are Volume, Bass, Mid, Treble, and Master VolumeReverb is run on two 12AX7/ECC83’s and drives through a 2 spring reverb tank. The reverb signal is also parallel to the input signal so there is no loss in tone or power when it’s turned up. The speaker is the UK made Celestion Heritage G12H30 at 8 ohms. The Speaker outs are comprised of a single 4 Ohm out and an 8 Ohm out, which can only be used individually one at a time. Effects Loop is a ¼” Send and ¼” Return non buffered loop. Only time base effects arerecommended such as Reverbs, delays, chorus, etc… Boost and Gain pedals are recommended to placed in the front of the amp to avoid clipping the Phase Inverter.Cabinet Dimensions are 20” Wide X 18.50” Tall X 9.75” Power: 20 Watts Channels: 1 Controls: Volume, Bass, Mid, Treble, and Master Volume Power Tubes: 2 x 6V6 Preamp Tubes: 3 x 12AX7 Rectifier Tube: 1 x 5AR4 Features: Dual inputs - high /low gain Speaker: UK Made G12H-30 Heritage 75hz Speaker Output: 4 Ohms or 8 Ohms
