Are you looking to buy a Matek F405-HDTE Flight Controller in Australia? Please note: With INAV firmware, DSHOT can not work on S3, S5,S7 because of DMA clash, please use ONESHOT or MULTISHOT and calibrate ESC PWM range. Features STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight InvenSense the 3rd generation IMU ICM42688-P 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX. 8motors+3servos in INAV/BF multirotor mixer. 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit) USB pin breakout for connecting to external USB adapter. Specifications MCU: STM32F405RGT6 IMU: ICM42688-P OSD: AT7456E, DJI OSD Baro: SPL06-001 (I2C) Blackbox: 16M-byte Flash memory 6x UARTs, 1x Softserial_Tx option 12x PWM outputs (8x Dshot) 1x I2C 4x ADC (VBAT, Current, RSSI, Airspeed) 2x PINIO 2x SH1.0_8pin connector for 4in1 ESC 1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit) 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 9~16V(Vxs) output ON/OFF switchable Dual analog camera signal switchable Power Input: 9~60V (3~12S LiPo) BEC: 5V 1.5A BEC: Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A) Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210) No Current Sensor built-in, supports external current sensor of PDB/4in1 Firmware ArduPilot: MatekF405-TE INAV: MATEKF405TE BetaFlight: MATEKF405TE Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g Including 1x FC F405-HDTE 6x Silicon grommets M4 to M3 1x SH1.0_8pin cable 5cm, 2x SH1.0_8pin connectors 1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista & Air Unit) Browse more Browse all Matek Flight Controllers Browse all F4 Flight Controllers Browse all Flight Controllers
