The INAV capable Matek F411-Wing is a smaller version of the 405-Wing Flight Controller. Even though it's smaller, doesn't mean it skimps on features. It comes equipped with many of the essential features found on the full-size version such as multiple BECs, a current sensor, OSD, Barometer, and an MPU6000 IMU.The small size (28 x 41mm) means it can fit on almost any size of aircraft. This FC is perfect for smaller sized fixed-wing aircraft that are tight on space.Differences between the 405-Wing and 411-WingFeatures the 411 is missing compared to the 405 Blackbox Logging No 12V BEC for FPV gear No RSSI input Lower current 5V BEC at 3A (F405 wing has 5A BEC) 2 UARTS (F405 wing has 6) 1 I2C (F405 wing has 2) Smaller current sensor (78A vs 104A) Lower current 3.3V BEC at 200mA (F405 wing has 300mA) Specifications MCU: 100MHz STM32F411 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: No VCP & 2x UARTs 2x Motors, 5x Servos outputs 1x I2C 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) Built-in inverter for SBUS input (UART1-RX) SoftSerial_Tx1: ST1 pad by default PPM: ST1 pad with softserial disabled Battery Voltage Sensor: 1:10 (Scale 1100) WS2812 Led Strip : Yes Beeper : Yes RSSI: No FC Firmware INAV FlightTarget: MATEKF411PDB Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection 2x ESC power pads Current Senor: 78A, 3.3V ADC, Scale 423 BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps BEC Vx output Designed for Servos Voltage adjustable, 5V Default, 6V via jumper Continuous current: 3 Amps BEC 3.3V output Designed for Baro / Compass module/ OLED and Spektrum RX Linear Regulator Continuous current: 200mA Physical Mounting: 24 x 24mm, Φ2mm Dimensions: 41 x 28 x 10mm Weight: 7g (Total 12g w/ bottom plate and M2 standoffs) Resources and Downloads Firmware and Drivers Mixer and Wiring Diagram
