✦ Verified product
Matek Flight Controller H743-SLIM-V4
AUD 134.80
Phaser FPV
Verified independent store
→
MatekSYS Flight Controller H743-SLIM-V4 Features STM32H743VIH6, 480 MHz, 2MB Flash IMU Dual ICM42688P Analogue OSD Baro DPS368 MicroSD slot for datalogging 7x UARTs, 2x 12C, 1x CAN
, 1x SPI3 breakout 6x ADC (Vbat, current, VB2, CU2, RSSI, Airspeed) 13x PWM Outputs Specifications FC MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash IMU: Dual ICM42688P Baro: DPS368 OSD: AT7456E (SPI2) Blackbox: MicroSD card socket 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including “LED” pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G) Dual Camera Inputs switch 5V 0r Vbat(2A) filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Power Vbat Input: 6~36V (2~8S LiPo) with TVS protection BEC: 5V 2.5A cont. (Max.3A) LDO 3.3V: Max.200mA VBat filtered output 2A for VTx and camera No Current Sensor built-in ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K) Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot FC Firmware ArduPilot: MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g Includes 1x H743-SLIM-V4 6x Silicon grommets M4 to M3 1x JST-SH1.0_8pin cable, 5cm 2x JST-SH1.0_8pin connectors 1x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm Browse More Browse all Flight Controllers Browse all Matek BROWSE MORE Browse all Flight Controllers Browse all Drone Electronics Browse all Matek
