Looking to buy a MATEK H743-SLIM FLIGHT CONTROLLER in Australia? You've come to the right place. Any questions? please live chat us, we're here to help! Check out our great range of Matek products here UPDATE V1, IMU MPU6000, ICM20602, discontinued since Oct.2021 V1.5, IMU MPU6000, ICM42605, discontinued since Apr.2022 V3, IMU ICM42688P, ICM42605/42688p FC Specifications MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash IMU: ICM42688P, ICM42605/42688p Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including “LED” pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G) Dual Camera Inputs switch 5V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Power Vbat Input: 6~36V (2~8S LiPo) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA No Current Sensor built-in ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K) Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot FC Firmware ArduPilot(ChiBiOS): MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 (To be supported soon) Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g Including 1x H743-SLIM V3 6x Silicon grommets M4 to M3 1x JST-SH1.0_8pin cable, 5cm 2x JST-SH1.0_8pin connectors 1x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm
