Updated version of the popular Matek H765-WSE Flight controller. Now with more powerful STM32H743VIH6 MCU running at 480MHz, compared to older WSE version running at only 216MHz. H743-WLITE vs F765-WSE STM32H743VIH6 vs STM32F765VIH6 RX4/TX4 vs RX5 Other components and layout are mostly identical. Specifications: MCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB Flash IMU: ICM42688-P Baro: DPS310 (I2C2) OSD: AT7456E Blackbox: MicroSD card slot (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(12+LED) 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 2x I2C 1x CAN USB/Beep Extender with Type-C(USB2.0) Dual Camera Inputs switch 9V(12V) for VTX power switch High-precision Current Sense, 220A range ADC VB2 voltage divider: 1K:20K ADC AirSpeed voltage divider: 20K:20K Mounting: 25 x 25mm, Φ2mm Dimensions: 44 x 29 x 14.5 mm Weight: 22g w/ USB/buzzer adapter Firmware: INAV: MATEKH743 ArduPilot: MATEKH743 PDB: Input voltage range: 6.8~30V (2~6S LiPo) 1x ESC power pads Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot) Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot) Sense resistor: 90A continuous, 220A peak BEC 5V Output: Designed for flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps, Max.3A BEC 9V / 12V Output: Designed for Video Transmitter, Camera, Gimbal ect. Continuous current: 2 Amps, Max.3A 12V option with Jumper pad for stable 9V/12V output, input voltage should > output voltage +1V BEC Vx Output: Designed for Servos Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 8 Amps, Max.10A for stable Vx output, input voltage should > Vx voltage +1V BEC 3.3V Output: Designed for Baro / Compass module and external 3.3V peripherals Linear Regulator Continuous current: 200mA Includes:1x Matek H743-WLITE Flight Controller1x USB(Type-C)/Beep (Passive buzzer) Extender 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port 1x Rubycon ZLH 35V 470uF capacitor Dupont 2.54 pins (Board is shipped unsoldered) Download Quick Start Guide
