Sspecifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory Continuous current rating: 0~150A DC Sensitivity: 20mV/A, INAV/BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50 VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0 Power Consumption: 17mA Voltage offset error at zero current : +-10mV Curr output voltage error: 5% Operating Temperatures: -30~80 °C 23 * 20* 23mm, 7g step file HCS-150A_step.zip Pinout Vbat: for voltage sense, support 0~69V IN Volt: = 1/21 Vbat, 0~3.3V out Curr: Current signal, 0~3.3V out 5V: power supply for HCS-150A board, support 4~13V IN, 17mA G: GND TX/RX: for firmware update and configure (to be supported) Tips mount Hall sensor far from iron and magnetic material Included 1 x Matek Hall Effect Current Sensor 150A
