Matte Black Rust Paint & Surface Prep Kit Tackle small to mid-sized corrosion projects start-to-finish with this complete kit. It combines our AOR-14 Matte Black Rust Paint aerosol (14 oz), AOR-99 Surface Prep Wax & Grease Remover aerosol (14 oz), and a pair of disposable nitrile gloves. First, remove loose rust and contaminants with the AOR-99 spray, then apply AOR-14 directly over surface rust for a UV-resistant, durable matte black finish. No primer or topcoat needed, and this kit covers up to 12 sq ft—perfect for automotive, industrial, marine, and home use. Key Features AOR-14 Matte Black Rust Paint (14 oz): Bonds to rust, seals out moisture, heat-resistant to 300 °F, coverage 10–12 sq ft AOR-99 Surface Prep (14 oz): Removes grease, oil & wax for superior adhesion on metal, plastic & fiberglass Disposable Nitrile Gloves: Protect hands during prep and painting All-In-One Kit: Provides both cleaning and coating products for efficient workflow No Topcoat Required: UV-resistant finish allows direct-to-rust application Benefits Professional Results: Prepares and coats in two steps for a long-lasting, matte black finish Time & Cost Savings: Eliminates need for separate cleaners, primers, or topcoats Versatile Use: Ideal for automotive chassis, farm equipment, marine hardware, garage fixtures, and more Easy Application: Aerosol delivery ensures even coverage and simple cleanup Durable Protection: Stops rust permanently and withstands harsh environments for years of service PREPARATION AND APPLICATION INSTRUCTIONS: Use a wire brush to remove loose rust, grease, and paint, make sure the surface is free of debris. Use the surface prep to remove greases and oils that could affect adhesion. Shake can for at least 2 minutes. Apply AGS Rust Paint 10” to 12" from the surface, apply in aside to side motion to achieve even coverage. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied one hour after the first. Allow 8-12 hours for a full cure after the last coat.
