Max Protect Ultra Nano Coat - Rubberised - Lite 30ml UNC-R LITE is a slower version of our incredible flexible membrane coating UNC-R. It is a permanent nano rubber coating designed specifically for hotter climates. Can be applied in ambient temperatures of up to 35c. This flexible nature enables the finish to be ultra-resistant to wash swirl mark build-up* and does not suffer from hard water spotting like some ceramic coatings do. Much easier to apply than UNC-R or UNCR PRO ELITE. No Infra Red Lamp Curing Required - Fully touch cured in 2 hours at ambient temperatures. The perfect choice for satin/matte vinyl or paint protection film applications. Slower flash-off times enable the coating to be spread evenly and removed easily without streaks or patches. For Satin/Matte finish a single layer is recommended, for gloss finish 2 layers are recommended. Incredibly glossy, super smooth and easy to clean surface is what UNC-R LITE is about. Same as our Nano Glass Coatings, UNC-R LITE has extremely high chemical resistance (Salt, Acid, Brake Dust, Exhaust Gasses, Tree-Sap, etc.) and high UV filtering properties. Recommended to apply at ambient temperatures below +35c, with perfect application temperatures from +10c to +25c. If you live in a hot country, please check if your temperatures are not too hot to apply this product, if temperature is above +35c UNC-R Lite can be applied in small sections but we recommend to wait until panel temperatures cool down. This is a Professional product and is not recommended for beginners. However, a seasoned DIY Enthusiast could manage it after learning the application instructions. Made in Japan
