Maxview Sat Finder A low cost budget meter capable of locating analogue and digital satellites.There are three LED’s and one signal level adjuster, the red LED indicates horizontal or vertical, the green LED indicates if a 22khz tone is present (High band digital) and the clear LED is the signal indicator.It works by pointing the dish away from the satellites and turning the adjuster until the clear LED glows red and a noise is emitted (Starting point).When the dish nears the satellite position the LED will turn green and emit a higher pitched sound.The adjuster can then be turned for fine alignment to the dish.It is powered up by the receiver and a small lead is also provided for the connection between the dish and meter.We have tried these out and they do the job they are intended for, they are a low cost meter but very good value for the money. The design / appearance may vary slightly as different batches are produced (IE: Some have white dials, others have black dials) however, they are all have the same specification as above and are genuine Maxview Satfinders.
