MODEL SPECS Name: Maxx Slash Type: Short Course Truck Speed: 70+ mph with Dual 3S LiPo batteries and optional pinion gear (sold separately) Skill Level: 4 Scale: 1/8 Weight: 10.34 pounds (4.69 kg) Length: 26.5 inches (674 mm) Width: 14.3 inches (363 mm) Front Track: 14.3 inches (363 mm) Rear Track: 14.3 inches (363 mm) Height: 9.64 inches (245 mm) Wheelbase: 15.5 inches (394 mm) Center Ground Clearance: 1.54 inches (39 mm) Driveline: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Ratio (Internal): 11.38:1 Gear Pitch: 1.0 metric pitch Steering Servo: 2090 digital high-torque waterproof (285 oz-in) Radio System: TQi™ 2.4 GHz transmitter with TSM® receiver Battery Compartment Specs: 181 mm X 56 mm X 45 mm MOTOR SPECS Name: 4-pole 2000 Kv Type: Sensorless brushless Weight: 14.32 oz (406 g) Length: 2.97 inches (76 mm) Diameter: 1.65 inches (42 mm) Shaft Size: 5 mm Connector Type: Traxxas 6.5 mm bullet connectors ESC SPECS Name: VXL-6s Type: Brushless Case Size: 2.28” (58 mm) x 2.83” (72 mm) x 1.81” (46 mm) Weight: 7.30 oz (207 g) Motor Connectors: 6.5 mm bullet connectors Battery Connectors: Traxxas High-Current Connectors VXL-6s™ Waterproof Electronic Speed Control 6S LiPo compatible Integrated cooling fan Real-time telemetry via Traxxas Link™ 3-LED status indicators Powered accessory ports 10-gauge silicone wire Integrated protection circuits Velineon® Brushless Motor 4-pole 2000 Kv 5 mm output shaft Finned can for better heat dissipation Fixed-Mesh Motor Cradle Supports entire motor length Reduces flex for longer gear life 70+ mph with Optional Gearing and Two 3S LiPo Batteries (sold separately) Traxxas Stability Management® Improves straight line acceleration and braking on low-traction surfaces Never dulls throttle or slows the truck Adjusts from off to 100% assistance from the transmitter TQi™ 2.4 GHz High Output Radio System TQi 2-channel transmitter Traxxas Link enabled 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required Programmable Multi-Function knob Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Clipless Body Quick and secure installation and removal Managed airflow for improved high-speed stability Rigid internal frame Additional nerf bar side support Eliminates body posts and clips Molded body reinforcements for tear-through protection Driveline Full-time shaft-driven 4-wheel drive Torque-Biasing Center Drive Absorbs shocks and distributes power Aluminum housing Sealed, silicone fluid-filled diffs with large module ring and pinion gears Steel pinion and spur gear Heavy-duty Cush Drive™ Steel-Core hybrid telescoping driveshafts Splined aluminum center driveshaft Modular Low-CG Composite Chassis Extended modular chassis design interlocks with front and rear bulkheads Absorbs and distributes impact energy Molded-in hex reinforcements on flat surfaces Easy to service and access components Driveline is sealed in the chassis to keep out dirt and grit Easy Battery Access Large battery compartment with secure snap-lock battery door Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3S LiPo batteries Batteries are protected deep in the chassis More secure than conventional retention systems Heavy-Duty Steering Bellcranks and Servo Large-scale high-output steering servo 285 oz-in of torque 0.18 sec transit speed Triangulated mounting system to fully support case Heavy-duty double-shear bellcranks Suspension Heavy duty double-shear suspension arms Tough composite formula resists impact damage, even in cold weather Engineered to optimize suspension travel and steering angles All critical suspension points have double shear strength Steel pivot balls C-hub and steering block geometry maximizes steering angle Fixed, high-strength camber and toe links Steel upper and lower tie bars GT-Maxx® Shocks Machined aluminum threaded body Extra-large bore and capacity Large-diameter damper shaft Lower seal cartridge with dual X-rings Adjustable upper spring retainer Plastic shock caps with pivot balls Lower spring perches bolted on Bumpers Heavy duty energy absorbing front and rear bumpers Lower front and rear skids for impact and abrasion resistance Integrated nerf bars for side impact resistance Adjustable wheelie bar with integrated carry handle Wheels & Tires Tough dual-profile wheels with keyed 17 mm hex receptor Large 5.3″ Maxx SC belted tires Limits tire expansion for game-changing performance 1-piece foam inserts Pre-glued and ready for action MODEL 102076-4: Maxx Slash® 4WD 6S brushless short course truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system, VXL-6s brushless power system, and ProGraphix® clipless body. What’s In The Box: Maxx Slash, Ready-To-Race short course truck with 2000 Kv brushless motor VXL-6s waterproof electronic speed control with integrated telemetry Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools Jumper plug (for 4S battery use) What You’ll Need: LiPo Batteries Traxxas recommends dual 5000 mAh 3-cell 11.1 V Power Cell LiPo batteries for maximum performance. Dual 7600 mAh 7.4 V LiPo batteries or a single 6700 mAh 14.8 V LiPo battery will operate the vehicle with reduced performance. NiMH batteries are not supported. LiPo Balance Charger with iD® AA Alkaline Batteries Four AA alkaline batteries for the transmitter.
