Silk screen medium helps thicken glaze and underglaze to create crisp details. Mix until the consistency is similar to brownie batter. Contents are 75 grams of dry powder material. For creating silkscreen design on clay or bisque: Mix four parts Underglaze or Stroke & Coat® (1″ wide dollop of glaze) to one part Silkscreen Medium (pinch). Using a palette knife, thoroughly mix glaze and silkscreen medium on a flat surface until the mixture is smooth and contains no lumps. Add small amounts of medium until mixture resembles a thick paste, similar to the consistency of peanut butter. Push material through designer silkscreen with a squeegee or finger. Can be used with low fire and mid-range glazes. Color: the base firing properties of the glaze used to create the ceramic paste remain unchanged: cone 06, cone 6 glazes perform just as they would in a non-paste state. For the deepest color we recommend using Stroke & Coat®, Designer Liner or Mayco Underglaze – products that contain high pigment content. Darker colors will produce deeper color in the fired result. Use of other color lines and/or light pigment colors (pinks, tans, light yellow, etc.) may yield less prominent results. Viscosity: if a paste is too thin your design may bleed. As a general rule: the more detailed the screen design the thicker the paste. For patterns, such as Chevrons and Stripes, you may find a thinner pastes works best.
