Dual SDI to HDMI Mini Converter for 3G/3D/HD/SD As a broadcast engineer or A/V professional you likely have diverse needs when it comes to managing SDI signals within your environment - for monitoring, distributing, switching, multiplexing, and processing 3D in real time. Until now, you have been forced to purchase different devices to perform these tasks. The new Matrox MC-100 solves all these challenges in one inexpensive, easy-to-use device.Matrox MC-100 is a dual SDI to HDMI mini converter that supports a wide range of display resolutions through 3G, Dual Link, HD, and SD-SDI. This single portable unit can be used as a HD-SDI switcher, a distribution amplifier, a multiplexer, and a 3D processing unit, making it the most versatile mini converter on the market. It should be in every video professional's toolbox. SPECIFICATIONS Dimensions Height: 118mm Width: 125mm Depth: 26mm Inputs and Outputs Two BNC 3G/HD/SD-SDI inputs Two BNC 3G/HD/SD-SDI outputs HDMI output Mini USB Type B for firmware updates Standards SDI compliance with SMPTE-259/292/372/424 and SMPTE RP168 SDI support of YUV 4:2:2 8-bit/10-bit and 4:4:4 on bypass SDI redundant inputs with loss-of-signal switcher Automatic SDI output selection between 3G/HD/SD-SDI dependent on input signal HDMI support of YUV 4:2:2 and 4:4:4 on bypass as well as RGB Input Display Resolutions NTSC PAL 720P 50/59.94/60 1080I 50/59.94/60 1080P 23.98/24/25/29.97/30 1080PSF 23.98/24/25/29.97/30 1080P (Level A) 50/59.94/60 1080P (Level B) 50/59.94/60 1080P Dual Link 50/59.94/60 Audio SDI audio: 16 channels embedded HDMI audio: 8 channels embedded, selectable between the first and second set of 4 pairs Electrical and Operating Requirements Unit voltage and amperage: 5V/3Amps Operating temperature: 0 to 40º C Storage temperature: -40 to 75º C Maximum altitude for operation: 3,000 meters Maximum altitude for transport: 12,000 meters Operating humidity: 20 to 80% relative humidity (non-condensing) Storage humidity: 5 to 95% relative humidity (non-condensing)