IN-STORE ONLY PLEASE CALL 905-881-7109 EMAIL: [email protected] 13 inputs (7 analog + 6 digital) Supports up to DSD256 files Comes with DA1 Digital Audio Module installed Optional dealer installed upgrade to DA2 Digital Audio Module available The C49 comes with a multitude of inputs. For analog, it has 2 balanced and 3 unbalanced, along with 2 phono inputs (comprised of 1 Moving Coil and 1 Moving Magnet) for connecting turntables. On the digital side, it has 6 inputs housed in the DA1 module. The inputs are: 2 coaxial, 2 optical, 1 USB and 1 proprietary MCT (for use with our MCT series of SACD/CD Transports). The DA1 is powered by an 8-channel, 32-bit Digital-to-Analog Converter (DAC) that is used in Quad Balanced mode; it supports up to DSD256 and DXD 384kHz for playback of high resolution audio. (NOW AVAILABLE: Optional dealer installed upgrade to the DA2 Digital Audio Module.) In total, the C49 has 13 inputs, and each can be given user-friendly names to simplify system setup and control. For connecting to your amplifier and the rest of your home audio system, the C49 has 2 balanced variable outputs, 2 unbalanced variable outputs, and 1 unbalanced fixed output. The outputs are designed for easy use when bi-amping your speakers so that neither your highs or lows are inadvertently turned off. Your audio sources can be fine tuned via the bass and treble tone controls. The C49 can be seamlessly integrated into your home theater system via Home Theater Pass Through. Power Control ports allow for the easy turn on/turn off of other connected McIntosh components, while the Data Ports can send remote control commands to connected source components. Our High Drive headphone amplifier with Headphone Crossfeed Director (HXD®) is also included. Specifications Electronic Specifications Number of Channels 2 Total Harmonic Distortion 0.005% Frequency Response +0, -0.5dB from 20Hz to 20kHz+0, -3dB from 15Hz to 100kHz Maximum Volts Out (Balanced / Unbalanced) 16V RMS / 8V RMS Sensitivity High Level (Balanced / Unbalanced) 900mV / 450mV Sensitivity Phono (Moving Coil) 0.45mV Sensitivity Phono (Moving Magnet) 4.5mV Signal To Noise Ratio (High Level) 100dB Signal To Noise Ratio (Moving Coil) 80dB Signal To Noise Ratio (Moving Magnet) 82dB Voltage Gain (High Level) 15dB Voltage Gain (Moving Coil) 60dB Voltage Gain (Moving Magnet) 40dB Input Impedance (Balanced / Unbalanced) 44K ohm, 22K ohm Connectivity Balanced Input 2 Unbalanced Input 3 Phono Input Moving Coil 1 (adjustable) Phono Input Moving Magnet 1 (adjustable) Upgradeable Digital Audio Module Yes: DA1 Digital Coaxial Input 2 Digital Optical Input 2 Digital MCT (DIN) Input 1 Digital USB Input 1 HDMI (ARC) Input 0 Digital AES/EBU Input 0 Balanced Fixed Output 0 Balanced Variable Output 2 Unbalanced Fixed Output 1 Unbalanced Variable Output 2 Headphone Output 1/4" High Drive with Headphone Crossfeed Director (HXD®) Input Level Match Yes, +/- 6dB Home Theater PassThru Yes Unbalanced Analog Connector Type Standard Service Port 1 Control Tone Controls Bass and Treble Tone Bypass and Input Assign Yes RS232 Control Input Yes Power Control Output 1 Main, 2 Trigger Rear Panel Data Port 4 Rear Panel IR Sensor Input Yes General Specifications Multi-Chassis or Single Single, two layer Output Meters No Vacuum Tube or Solid State Solid State Power Consumption (On) 30 Watts Weights & Dimensions Dimensions (W x H x D) 17.5" (44.45cm) x 6" (15.2cm) x 18" (45.72cm) Weight 23 lbs (10.4 kg) Shipping Weight 37.5 lbs (17 kg)
Related
Related
Related
Related