Made from Chesapeake Flooring Mcore Plus | Pinecone flooring, this Stair Tread will now allow you to use your favorite flooring on your stairs. Previously, you would have to use other tread brands that were made of subpar materials and only looked similar to your flooring! To make matters worse, a transition piece was often required at the top of the stairs posing both a hazard, and an eye sore. Treads Plus has made it possible to use true Chesapeake Flooring* Mcore Plus | Pinecone flooring to seamlessly transition from your flooring to your stairs.This product comes in several sizes. The first two sizes fit 1-1/8 inch stair noses and have a length of either 42 or 47 inches. For anything bigger, the other two sizes fits up to 1-1/2 inch stair noses with the same length options. All sizes come in a beautiful bull nose or square nose design. This product comes in two different types. The Stair Tread Kit variant comes with a stair nose made from a Chesapeake Flooring Mcore Plus | Pinecone Luxury Vinyl Plank and includes one additional Chesapeake Flooring Mcore Plus | Pinecone Luxury Vinyl Plank cut to your selected length that clicks into the back of the stair nose to ensure coverage of your Entire Stair Tread. The Stair Nose variant comes in a depth of roughly 7 inches and is made from one Chesapeake Flooring Mcore Plus | Pinecone Luxury Vinyl Plank. This is especially useful for your top step as it can click into your existing Chesapeake Flooring Mcore Plus | Pinecone flooring. It can also be used for all your stairs if you wish to supply your own planks that will click into the back of the stair nose and cover the remaining tread. Both are designed to be fitted and glued to the unfinished Stair Tread Nose.Treads Plus is an independent service and not affiliated with or sponsored by Chesapeake Flooring or any of its subsidiaries. Stair Noses and Treads created by Treads Plus are warrantied by Treads Plus and may not qualify for any warranty of Chesapeake Flooring. Please see our disclaimer page for full details.
