Gap filling epoxy paste adhesive for civil engineering use. Megapoxy PM is specially formulated structural non-sag epoxy filling paste and adhesive. This easy to use two-part epoxy sets after mixing to an extremely durable adhesive ideal for bonding natural stone, concrete, steel, timber, glass and masonary. It is easy to use 1:1 mixing make it suitable for onsite applications. Uses: Precast concrete articles Concrete Pipes and Tanks Grouting bolts Fibreglass articles Natural stones Concrete floors and stairs Bricks and ceramics Concrete columns Metals In-situ formed concrete Surface Preparation: Metals: Should be grit blasted to clean surface. Mechanically abraded and degreased. Wire brushing is not entirely satisfactory and gives minimal adhesion only. Painted Surfaces: A proprietary brand paint stripper should be used. Concrete - the surface may be either flame cleaned or mechanically abraded. Processing Data: Mixing Ratio:1 part resin to 1 part hardener by volumeMixing: Mix until uniform grey or whiteWorking Life at 25°C: 45 minutesMinimum Application temperature: 10°CMinimum Cure Time: 12 hours at 25°CFull Cure Time: 4 days at 25°C
