Merging Technologies Anubis Pro Audio Interface Network Converter Anubis can be used standalone or simultaneously with a DAW for front-end signal processing combined with the Music Mission DSP engine for ultra-low latency monitoring and/or tracking. Big mixer with astonishing performance with all the sends, cues, snapshots and effects you need for single home recording or for multiple performers recording sessions. Connect your MIDI keyboard, record you instruments, balance your low latency mix, make your performers cues use your favorite effects chains and route them in the Anubis mixer. No color and fully transparent PreAmps with astonishing A/D performance and a dynamic range of 139dB with gain scale from 0 to 78dB (boost). Our pristine D/A technology ensures that you hear what your recording, mixes and mastering deserves. Technical Specifications Case Material Premium machined and anodized aluminum Dimensions 200 x 128 x 40mm Weight 950 g Top Panel Display Capacitive Touch, TFT LCD 800 x 480 pixels resolution 16:9 Aspect ratio Rotary Encoder Anodized aluminum + Black rubber O-ring 7 x Hardware + Soft buttons RGB LEDs Bottom Panel Mic stand thread 3/8” 16BSW European thread incorporated Note: Americas 5/8” 27UN adaptor not included SOFTWARE Windows Driver/OS Windows 7 64bit / Windows 8.1 64bit: RAVENNA ASIO v12.0 (ASIO 2.2) Windows 10 64bit: MAD v2.0 (Merging Audio Device) Mac Driver/OS VAD Core Audio for macOS 10.8.5 or higher (Intel & M1) Linux Driver/OS ALSA Linux driver for RAVENNA/AES67 ANEMAN Version 1.1.7 and above MICROPHONE INPUTS 1-2 (COMBO) Connector Type Combo Locking Neutrik XLR / TRS Dynamic Range Mic / Mic Boost 137 dB / 128 dB (A-weighted, typ.) Max Input level Mic Pad / Mic / Mic Boost +24 dBu / +12 dBu / +0 dBu Frequency response +0/-0.2dB @ fs = 48 kHz 9 Hz - 22 kHz Frequency response +0/-3dB @ fs = 96 kHz 9 Hz - 46 kHz Frequency response +0/-3dB @ fs = 192 kHz 11 Hz - 94 kHz THD+N Preamp + A/D 1kHz @ 0 dBFS < -110 dB (0.0003%) Interchannel Crosstalk @ 1kHz < -130 dB Equivalent Input Noise Mic / Mic Boost (150 OHMS Source) < -125 dBu / -128 dBu (A-weighted, typ.) Common Mode Rejection Rate (20 Hz - 20 kHz) > 80 dB Input Impedance (Differential) ~ 10k OHMS Gain Range (Software controlled) 0 dB to +66 dB Gain Step Coarse / Fine 0.5 dB / 0.1 dB Phantom Power (Software Switchable Per Channel) +48V Phase Reverse (Software Switchable Per Channel) Yes Low Cut filter (Software Switchable Per Channel) -12 dB/octave, 80 Hz 5 low-end in-channel deviation pt: Mic 9 Hz Interchannel phase 10 Hz - 100 kHz < -2 LINE INPUTS 1-2 (COMBO) Connector Type Combo Locking Neutrik XLR / TRS Dynamic Range, ref +24 dBu 139 dB (A-weighted, typ.) Max Line Input Level +24 dBu Input Impedance (Differential) ~ 10k OHMS THD+N Preamp + A/D 1kHz @ 0 dBFS < - 104 dB (0.0006%) Interchannel Crosstalk @ 1kHz < -140 dB Sensitivity Range for 0 dBFS (Software controlled) +24 dBu to -42 dBu Common Mode Rejection Rate (20 Hz - 20 kHz) > 80 dB 5 low-end in-channel deviation pt: Line 9 Hz Interchannel phase 10 Hz - 100 kHz < -2 INSTRUMENTS / HI-Z & LINE INPUTS 3-4 Connector Type 1/4” TRS Female Dynamic Range, ref +18 dBu 136 dB (A-weighted, typ.) Max Input Level +18 dBu Input Impedance (Single ended / Differential) ~ 1M OHMS / ~ 2M OHMS Gain Range (Software controlled) 0 dB to +66 dB THD+N Preamp + A/D 1kHz @ 0 dBFS < - 111 dB (0.0003%) Interchannel Crosstalk @ 1kHz < -150 dB Sensitivity Range for 0 dBFS (software controlled) +18 dBu to -48 dBu Common Mode Rejection Rate (20 Hz - 20 kHz) > 70 dB 5 low-end in-channel deviation pt: Inst/Line 2 Hz Interchannel phase 10 Hz - 100 kHz < -1 MAIN OUTPUTS 1-2 Connector Type Neutrik XLR Male Dynamic Range 123 dB (A-weighted, typ.) Max output Level (Differential / Single ended) +24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms) Frequency response +0/-0.2dB @ fs = 48 kHz 6 Hz - 22 kHz Frequency response +0/-3dB @ fs = 96 kHz 2 Hz - 46 kHz Frequency response +0/-3dB @ fs = 192 kHz 2 Hz - 92 kHz Output Impedance < 70 OHMS THD+N 1 kHz @ 0 dBFS < - 110 dB (0.0003%) Output Level Matching -0.01 dB Attenuation Range (Software controlled) - dB to 0 dB Gain Step / Precision 0.5 dB / -0.05 dB LINE OUTPUTS 3-4 Connector Type 1/4” TRS Female Dynamic Range 123 dB (A-weighted, typ.) Max output Level (Differential / Single ended) +24 dBu (12.2 Vrms) / +18 dBu (6.1 Vrms) Output Impedance < 70 OHMS THD+N 1 kHz @ 0 dBFS < - 110 dB (0.0003%) Output Level Matching -0.01 dB Attenuation Range (Software controlled) - dB to 0 dB Gain Step / Precision 0.5 dB / -0.05 dB HEADPHONES Headphone Jacks 2 Independent ” TRS Female Stereo 6.3 mm Dynamic Range (A-weighted, typ.) High / Low < -122 dB / - 117 dB Max output Level High / Low 17.1 dBu / 7.8 dBu Frequency response +0/-0.2dB @ fs = 48 kHz 6 Hz - 22 kHz Frequency response +0/-3dB @ fs = 96 kHz 2 Hz - 46 kHz Frequency response +0/-3dB @ fs = 192 kHz 2 Hz - 92 kHz Output Impedance < 0.035 OHMS THD+N 1 kHz @ 0 dBFS High / Low < -108 dB (0.00039%) / -110 dB (0.0003%) Attenuation Range (Software controlled) - dB to 0 dB Gain Step / Precision 0.5 dB / -0.05 dB A/D - D/A CONVERSION Supported Sample Rates PRO 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz Supported Sample Rates PREMIUM 44.1 kHz up to 352.8 kHz (DXD), 384 kHz, DSD64, DSD128 & DSD256 Bit Depth Per Sample 32 A/D Latency Sharp Short delay @ 44.1kHz to 96kHz 5 samples A/D Latency Sharp Short delay @ 174.6kHz to 192kHz 6 samples A/D Latency Sharp Short delay @ 352.8kHz to 384kHz 7 samples D/A Latency Sharp @ 44.1kHz to 384kHz 35 samples D/A Latency Slow @ 44.1kHz to 384kHz 9 samples D/A Latency Apodizing @ 44.1kHz to 384kHz 35 samples D/A Latency Brickwall @ 44.1kHz to 384kHz 35 samples COMPLEMENTARY I/O RAVENNA/AES67 (Gigabit Ethernet) Locking EtherCON compatible with standard RJ45 connectors Built-in Talkback microphone Mono omnidirectional condenser capsule GPI/MIDI Input 1/4” TRS Female GPO/MIDI Output 1/4” TRS Female
Related
Related
Related
Related