This heavy-duty metal wall mount secures PA speakers and monitors in fixed installations where floor space is limited. Churches, schools, restaurants, and venues use it to position speakers overhead or along walls for consistent coverage without blocking walkways. The mount handles speakers up to 50 pounds with both vertical and horizontal adjustment capabilities. Its robust metal construction provides stable positioning for mid-sized PA speakers and floor monitors typically used in permanent installations. The 10" x 5.5" wall plate distributes weight across a large mounting surface, while the 4" tall speaker mount shaft positions at 12 inches from the wall for proper clearance. The mount fits standard 1 3/8" speaker pole sockets securely or 1.5" sockets with slight play. Pre-assembled design means you can install it immediately without additional fabrication. This mount works well in meeting rooms up to 100 people, small worship spaces, retail environments, and restaurants where speakers need permanent positioning. It's also useful for DJ booths and home studios where wall-mounted monitors free up valuable floor and desk space. Installation hardware includes wall screws and plastic anchors for standard drywall mounting. The mount arrives pre-assembled and ready to install with basic tools. Seismic Audio backs this mount with reliable construction for long-term installations. Ships quickly so your venue setup stays on schedule. Technical Specifications Spec Value Weight Capacity 50 lbs Wall Plate Dimensions 10" x 5.5" Distance from Wall 12" Speaker Mount Shaft Height 4" Pole Socket Compatibility 1 3/8" (tight fit), 1.5" (loose fit) Construction Heavy-duty metal Adjustment Vertical and horizontal Installation Hardware Wall screws and plastic anchors included Assembly Pre-assembled Recommended For Fixed installations, small venues, meeting rooms Frequently Asked Questions What size speakers will this wall mount support? This mount handles speakers up to 50 pounds, which covers most compact PA speakers, floor monitors, and studio monitors used in small to medium venues. It fits standard 1 3/8" speaker pole sockets securely or 1.5" sockets with slight movement. The 12-inch extension from the wall provides clearance for most speaker cabinets without hitting the wall. Can I angle the speaker up or down after mounting? Yes, the mount provides both vertical and horizontal adjustment once installed. You can tilt the speaker up or down and rotate it left or right to direct sound where needed. The 4-inch tall mounting shaft gives you flexibility to position the speaker at the optimal angle for your room. What type of wall can this mount be installed on? The mount includes standard wall screws and plastic anchors for drywall installation. For heavier speakers or concrete/brick walls, you'll need appropriate masonry anchors or bolts rated for the combined weight of the mount and speaker. The 10" x 5.5" wall plate distributes load across a large surface area for stability. How far will this position my speaker from the wall? The mount extends your speaker 12 inches from the wall surface. This provides adequate clearance for most PA speakers and monitors while keeping them close enough for wall-mounted installations. The distance helps prevent bass buildup against the wall and allows proper air circulation around the speaker. Do I need special tools to install this mount? Basic tools are sufficient since the mount arrives pre-assembled. You'll need a drill for pilot holes, a screwdriver or drill bit for the mounting screws, and a level to ensure straight installation. For heavier speakers or masonry walls, you may need a hammer drill and appropriate anchors beyond what's included.
