Metallic Plastisol Ink lays down a brilliant, reflective metallic finish in gold, silver, copper and black — 12 shades of smooth, high-shine metal. Built on our low-cure performance chemistry, it cures cool at 290–310°F, stays super-stretch and bleed-resistant, and holds its shine on polyester, spandex and performance blends. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey. 12 metallic shades. Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA. Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing. Features & benefits Brilliant metallic finish — smooth, reflective gold, silver, copper and black 12 metal shades — solid, high-shine coverage in one hit Low cure (290–310°F) — runs cool; super-stretch and bleed-resistant Flexes without cracking — the metallic film moves with performance fabric CPSIA-compliant & phthalate-free — made in the USA Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check the effect, opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job. What it prints on 100% polyester — jerseys, performance tees, athletic wear Spandex & performance blends — the super-stretch film moves with the fabric Poly blends & sublimated garments — prone to dye migration — the bleed blocker holds color back Printing & curing Mesh: 86–156 to carry the metallic flake and keep the shine Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer Flash: 240–260°F between colors Cure: curing is a time-and-temperature process — bring the full ink film to 290–310°F (143–154°C); the low cure is what keeps polyester dyes from bleeding; confirm with a temp gun or donut probe, not dryer air temp Recommended companion products Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first). Quick Flash Reducer — thins for easier printing. Soft Hand Base — softer hand feel. Pantone® Custom Color Match — send us your target Pantone® and we custom-mix the color for you (plastisol, solvent, UV & water-base). Cleanup: OPTI Wash 125 and OPTI Spot 303. How close are we to your Pantone? See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target. Safety, PPE & storage Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink. Print with adequate ventilation; vent your dryer. Always stir before use. Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As an all-polyester low-cure ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze. Refer to the Safety Data Sheet before use. Compliance CPSIA compliant (16 CFR 1303
