The Micro Rosette TWIST Mount Kit (Build Your Own) is a modular accessory mounting arm with your choice of quick-release spuds on each end, allowing attachment of a wireless transmitter, monitor, audio receiver, and more to a camera. Install the bottom spud on your camera or cheeseplate and the top spud on your monitor or accessory, then link them together with a Micro Rosette Arm. Micro Rosette to TWIST Mount clamps have a variable friction design, so you can grab and twist the arm or accessory without loosening a thumbscrew. Extension arms have serrated teeth to allow for angled configurations in increments of 22.5º, a captive 1/4-20, and lengths of 12.5mm, 25mm, 50mm, 75mm, and 100mm. Two 90º bend pieces are also included for off-axis configurations. Check out our Compatibility Chart Here. Choose your Spuds: No Spud A 15mm friction hole with no mounting spud ARRI 1/4-20 ARRI 1/4-20 with removable 3mm locating pins 10.4mm center to center Second set of holes for 3mm pins 15mm center to center Works with any cheese plate or accessory with ARRI standard 1/4-20 holes Works with Blackmagic Design PYXIS Monitor Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5 Works with ARRI Camera Control Monitor CCM-1 ARRI 3/8-16 ARRI 3/8-16 with removable 3mm locating pins 15mm center to center Works with any cheese plate or accessory with ARRI standard 3/8-16 holes Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002) Canon C400, C300mkIII, C500mkII, LM-V2 Works with Canon C400, C300mkIII, C500mkII, and LM-V2 ARRI M6 Rosette Works with Z CAM 2.89" EVF101 Works with original PORTKEYS OEYE Sony / PortKeys 1/4-20 Attaches to any of the Sony cameras with Sony locating pins like Burano, FX6, and FX9 Works with Sony Burano EVF Pivot Adapter Works with PORTKEYS LH7P (be careful, the monitor is plastic) Works with PORTKEYS 5” BM5 IV L Bracket 1/4-20 Includes the slotted L Bracket with two 1/4-20 screws Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions Works with original RED DSMC1 EVF Female ARRI 1/4-20 Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) Female ARRI 3/8-16 Works with any 3/8-16 product, including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center) 1/4-20 Rosette Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF This is NOT a regular ARRI rosette Old-Style SmallHD 1/4-20 Older style SmallHD 1/4-20 with wide locating tabs Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5 Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Indie 7, Cine 7 ARRI Viewfinder Wedge Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2 Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc. Works with 3rd party products that utilize ARRI-style mounting wedges. Blackmagic Viewfinder Wedge Includes the NATO rail, Knuckle, and spud for Blackmagic Design dovetail wedges Works with URSA Cine EVF - CINEURSAB/EVF Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT Works with PYXIS Monitor Kit - CINEURSABB/AMKIT Action Cameras (GoPro‚ DJI Osmo Action‚ Insta360) Standard receptacle for 2-prong action camera feet Works with GoPro, DJI Osmo Action, Insta360 Works with many other 3rd party action camera products Sony FX6 Attaches to the FX6 monitor to provide a rigid "flop stop" mount Monitor folding capability is maintained Male Hot Shoe Clamps to standard camera shoe mounts Female Hot Shoe Female shoe receptacle for standard shoe accessories NATO Rail Standard NATO rail with safety pins on each end Mounting area between pins is 30mm NATO Clamp Standard NATO clamp with ratcheting thumbscrew Clamping area between outside edges 21mm Tripod Expansion Adapter Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center Threaded ARRI 1/4-20 and 3/8-16 holes also available Sony Venice Viewfinder Wedge (DVF-EL200) Works with Sony Venice Viewfinder Wedge (DVF-EL200)
