The Micro Ultramount Press Riser has the same beefy 3/16" thick steel construction as the standard Ultramount, however, the Micro is only 4" tall instead of 9-3/4". Footprint is 9-1/4" wide by 9" deep. Standard dedicated Ultramount plates cross over to the Micro Ultramount too, so you can swap top plates if you choose to switch presses. (Note) With the Micro Ultramount only being 4" tall, most press linkages will hang below the benchtop to impede opening the cabinet doors or drawers (if you have them) below your bench. If you have any doubt before placing an order, measure the linkages hanging down below your bench top and subtract 4". If you want to have the press completely on top of the bench, the standard 9-3/4" Ultramount will fix you up perfectly. Attention: Please choose your particular press application from the drop down box above. Note: If you do not see your press listed here, it is most likely available in quick change style right (Here) Swap out your presses in 30 seconds. Downloadable 4" Micro Ultramount footprint PDF (Here) Hardware to bench info: (You will need 4pcs of 5/16" diameter hardware of whatever style you need to attach the mount to your bench. I would include it, but everyone's benches are different and require different hardware.) However, for simplicity, here are 2 premade bolt kit options for most benches up to 1 1/2" thick. Have a look (Here) for the standard bolt through style kit: And (Here) for the Barbed T-Nut style kit:
Related
Related
Related
Related