You Will Receive: - Microfluidics Model 110S Microfluidizer Processor Homogenizer- 300 mL Glass Reservoir- H10Z 100 Micron Ceramic Interaction Chamber (IXC)- Cooling Coil and Bath- ½” Air Hose with Quick Connect Fittings- 90-Day Warranty Fully Tested and Working Without Issue: After its initial disinfection and inspection, our technicians tested the Microfluidics Model 110S microfluidizer processor with the following results: - Cleaned and inspected liquid end: PASSED- Ran and sterilized with 1 liter of isopropyl alcohol: PASSED- Verify highest pressure ran of 23,000 psi: PASSED- Check process pressure control valve: PASSED- Check pressurized air inlet assembly: PASSED- Check/replace plunger seal assembly: PASSED- Clean and inspect plunger: PASSED- Clean and inspect/replace high pressure fittings: PASSED- Clean and inspect/replace inlet check valve: PASSED- Backflush the interaction chamber: PASSED Notice: Please review the technician checklist in the product images to see more details of the inspection and testing performed. Specifications: Manufacturer Microfluidics Corporation Model No. 110S Serial No. 2002068 Pressure range 3,000 to 23,000 psi (204 to 1,564 bar) Flowrate range 250 - 600 ml/min Feed Temperature Maximum 165°F (75°C) Air compressor power requirement 57 scfm @ 120psi, (27 l/s @ 8.3 bar), 15 HP (11 kw), pressure dew point of -35°F to 0°F, 15 hp (11 kw) Sample size 14 mL to continuous Overall dimensions (W x D x H) 13 x 26 x 18 in Weight 55 lb (25 kg) Note: All figures based on testing with water
