This is an Autohex II BMW Professional Programming ToolThis tool covers ECU programming and coding.What you get: Autohex II Hardware WVCI HW 5. BMW Software Standard License. BMW Ecu Online Programming License. BMW Software ISN Boot Mode License. BMW ISTA/D driver to run dealer software. OBD Cable FEM Cable Tricore Cable USB Cable Power Adapter 1 year technical support. 1 year hardware warranty. Using this kit you can do following: Read ISN in G Series: MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs): DME_840 DME_840H DME_84T0 DME_860 DME_86T0 DME_880 DME_88T0 DDE803P DDE832C Read and Write ISN in MD1 and MG1 F Series: MD1 and MG1 (MDG1) ISN Reading of following DME/DDE: DME_83T1 DME_840 DME_841 DME_841H DME_861 DME_88T0 DDE803 Read and Write All ISN in F Series: Autohex II reads and writes all ISN of DME/DDE in F series: EDC17C41 EDC17C41 EDC17C50 EDC17C56 EDC17C76 EDC17CP09 EDC17CP45 EDC17CP49 MEVD17.2 MEVD17.2.3 MEVD17.2.4 MEVD17.2.5 MEVD17.2.6 MEVD17.2.8 MEVD17.2.9 MEVD17.2.G MEVD17.2.H MEVD17.2.P Read and Write All Long ISN in E Series: Autohex II reads all ISN of DME/DDE in E series: EDC17C06 EDC17C41 EDC17C50 EDC17C56 EDC17C76 EDC17CP02 EDC17CP09 EDC17CP45 EDC17CP49 MSV80 MSV80.1 MSD80 MSD81 MSD85 MSD85Y MSS60 MED17.2 MEV17.2 MEV17.2.2 MEVD17.2 MEVD17.2.2 MEVD17.2.7 MEV1746 MEVD17.2.4 MEVD17.2.5 MEVD17.2.9 Read most of old ISN in E Series: Autohex II reads the ISN of DME/DDE in E series: EDC16C1 EDC16C31 EDC16C35 EDC16CP35 ME9 ME9.2 ME9.2.2 MEV9.2 MSV70 MS45 Individual Programming for any Ecu (DOIP Protocol) Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN With Autohex II you can read and write ISN from all CAS versions in E and F series Read ISN from all Trciore DME/DDE by boot mode This function is important when the DME/DDE is not responding, and you need the ISN for replacment BMW E series EGS ISN matching with CAS You can reset EWS security from all BMW E series EGS by OBD BMW F series EGS EWS Reset for 6HP and 8HP models You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench BMW E series, F series, and G series Auto Coding Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module Managing the Vehicle Order (FA) in BMW cars You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup ECU Unlock Security from CAS4, CAS4+, FEM and BDC You can unlock secrity of CAS4/4+, BDC and FEM to able to: Change CAS and BDC and FEM VIN Change CAS and BDC and FEM ISN Mileage Reset for CAS and BDC and FEM Making a key for CAS and BDC and FEM Read and Write ISN on Bench for MSX8X With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the ECU Specifications Table: Online Ecu Programming YES Ecu Coding YES Ecu Advanced Coding YES Read ISN DME and CAS YES Write ISN DME and CAS YES Read ISN From EGS 6HP/8HP YES Reset EGS EWS 6/8 HP YES DME ISN By Boot Mode YES Vehicle Order (FA) Manager YES Read CAS2,3,4,4+ Flash (BDM) NO CAS1,2,3,4 Key Programming NO FEM/BDC Key Programming NO CAS4/FEM/BDC Mileage Reset YES CAS/FEM/BDC Replacment YES Hextag Tool Included NO Technical Support 1 year (Extendable) Microtronik Downloads
Related
Related
Related
Related