Clutch Lever Advantages The primary advantage of this lever is a 50% reduction in actuation force. This means less fatigue, less arm pump, and more endurance, especially during high-intensity race conditions. A shorter than stock lever length allows a one or two finger operation enabling you to squeeze the lever to the bar without releasing your grip with the rest of your fingers. Depending on the mounting position you employ, you can even go for a three finger grab when necessary. The ball on the lever end meets AMA safety rule requirements and provides a comfortable grip reference for your fingers; it also helps prevent accidental release while traversing rough terrain at high speed. The width of the lever distributes the contact pressure over a greater surface area on your fingers reducing load concentrations that induce blistering. Brake Lever Advantages Complete your handle bar controls with a matching Brembo brake lever. This lever utilizes the stock pivot geometry so the action is the same as a stock brake lever. The difference is that the brake lever is the same "shorty" length as the CLever clutch levers and has the same ergonomic feel of the wide blade. These features allow you to use a one or two fingered grip on the lever with either a short or long reach. You can maintain a tight grip on your bars using your remaining fingers with no danger of trapping them in between the blade and the bar in a panic grab situation. Brembo (B2C) fits: KTM ’16-20 125/150 SX/XC/XCW KTM ’06-20 250/300 XC/SX/XCW/EXC/6D KTM ’11-20 350 XCF/XCWF/EXCF/SXF/6D KTM ’09-10 400 XCWF/EXCF KTM ’07-20 450 XCF/SXF/XCWF/EXCF KTM ’12-20 500 XCFW/EXCF/6D KTM ’08-11 530 XCFW/EXCF Husqvarna ’14-16 125-501 TE/TC/FE/FC (except ’16 FC & ’16 TC 125) Husaberg ’11-14 125-570 FE/FX/TE Beta ’10-20 All Models Sherco All years and all models with Brembo clutch and brake master cylinders TM '08-20 All models with Brembo clutch master cylinders Magura 2 (M2C) fits: KTM ’09-15 125/150 SX/XC/EXC KTM ’09-20 200 XCW/EXC KTM ’13-20 690 E/R Husqvarna ’16 FC 250/350/450 Husqvarna ’17-20 125-501 TE/TC/TX/FE/FC/FX Husqvarna ’16-20 701 Enduro/SM Magura 1 (M1C) fits: KTM ’04-12 65/85/105 SX/XC KTM ’04-08 125/144 SX/XC/EXC KTM ’04-08 200 XCW/EXC KTM ’00-05 250/300 SX/XC/XCW/EXC KTM ’04-08 400 XCFW/EXCF KTM ’04-06 525 SX/XC/EXC/XCW KTM ’07-12 690 E/R KTM ’04-09 950 KTM ’07-13 990 Nissan 50% force reduction (N1C) Clutch Fits: ‘21-22 Kawasaki KX 250 ‘19-22 Kawasaki KX 450 Magura 0% force reduction (M1B) Brake Fits: 18-22 Husqvarna TC/TE/TX/FC/FE 125-501 Brembo (B2B) Fits: KTM ’14-20 125-500 All Models Husqvarna ’14-17 125-501 TE/TC/TX/FE/FX – Brembo Brakes TM '08-20 All models with Brembo brake master cylinders BrakTec 30% force reduction (BT1C) Fits: * Fits both clutch and brake master cylinders - also see BT1B* 21-22 Gas Gas EC 250/250F/300/350F 22 Husqvarna TE/FE 150-501 (Does NOT fit the TX, TC, FX, or FC - line see Brembo B2C) *Please Note: Either of the BrakTec levers can be used as a clutch or as a brake lever. The BT1C is a 30% force reduction, two finger lever. The BT1B is a 10% force reduction, one finger lever. The ideal setup for me is to use the BT1C on the clutch master cylinder and the BT1B on the brake MC. Some pictures may be for example purposes only, on occasion parts may be on Special Order If your part is listed as ON ORDER, call (519) 268-8484 or EMAIL for availability. Last Update 12/20/2023 CS
Related
Related
Related
Related