Standard Yellow Grey Milliput is a two part epoxy pack weighing 113g per pack Use for scratch building, sculpting, repairing, gap filling, pattern making and customizing. Ideal for military miniatures, railway, farm, ship model parts, dollhouse accessories and plastic models. It can be used for repairing, modelling and sculpting. Can also be used as a gap filler for car bodies, in plumbing and also caravan and boat repairs. Temporary repairs for car petrol tanks, batteries, radiators and exhausts. Milliput features: Self hardening Non - shrinking Tough and durable Highly adhesive to most materials Water and chemical resistant Sets under water and is electrically resistant moulds like putty - sets rock hard The Standard yellow grey putty dries to a yellow/grey (pale green) colour and can be painted. It is very important when using Milliput that you mix the two parts for at least five minutes. Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking. After setting hard Milliput continues to cure and is fully cured after more than five hours. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set.
