Keep Your pH Electrode Hydrated, Accurate, and Ready to Read Protect your pH meter and extend probe life with Milwaukee pH Meter Storage Solution. Designed to keep the glass bulb and reference junction hydrated, this ready-to-use solution helps maintain fast response times and stable, repeatable measurements for brewing, meadmaking, aquariums, hydroponics, and more. Why Use a Storage Solution? Extends electrode life: Prevents the glass membrane and junction from drying out. Improves stability: Helps the probe reach a stable pH reading more quickly. Reduces drift: Supports consistent results between calibrations. Ready to use: No mixing required—just pour into the cap or storage vessel. How to Use Daily storage: Rinse the probe with clean water, gently blot, then store the bulb/junction immersed in storage solution (fill the protective cap or a small vial). If the probe dries out: Soak the tip in storage solution for at least 1–2 hours (longer if heavily dried), then recalibrate before use. Do not store in DI/RO water: It can damage the reference system and shorten probe life. Best Practices Rinse with clean water between measurements to avoid cross-contamination. Keep some solution in the cap at all times so the sensor never dries. Pair with Milwaukee calibration buffers (pH 7.01 / 4.01 / 10.01) for routine accuracy checks. Tip: After long storage or temperature swings, perform a fresh calibration for the most reliable readings.
