Minelab Pro Find 25 with free 9v battery! Proportional audio/vibration response For greater accuracy the Minelab PRO-FIND 25 indicates the depth of buried targets with a proportional vibration and audio response. As the pin pointer probe gets closer to the target, the intensity of vibration and audio increases. Adjustable sensitivity on Minelab Pro Find 25. Narrow down the exact location of targets with the PRO-FIND 25′s adjustable sensitivity. This can be increased to locate deep targets or decreased to precisely locate small targets. Minelab Pro find two mode operation Select from two modes – Audio & Vibrate or Vibrate Only for silent searching. Durable water resistant construction Submersible probe end. The whole Minelab Pro Find 25 pin pointer can be washed under running water. Probe side sensitivity Probe side detection area (360°) allows targets to easily be located in the walls of the hole. Auto power off To save battery life, the PRO-FIND 25 switches off after eight minutes of inactivity. Minelab Pro Find 25 Pin Pointer LED flash light Easily see targets when pinpointing in low light conditions and in deep holes. Holster included Belt mounted holster to comfortably carry pin pointer. VLF TechnologyVLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions. Detector Interference Free technologyThe advanced design of the Minelab PRO-FIND 25 removes false signals and noise, commonly associated with other pin pointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field. Minelab Pro find 25 in stock ready to ship! SpecificationsLength 9.3 in (237 mm) Diameter 1.6 in (41 mm) base, 0.8 in (20 mm) probe Weight with Battery 6.82 oz (193.5 g) Battery 9 volt PP3 (included) Battery Life 30 hours nominal (alkaline battery) Warranty 24 months. Holster included.
