This part allow you to use mini-T springs on your Shocks. You will receive a set of 4 in black. Note: If you limit your Shock Stroke Below to achieve and eye to eye lower then 80mm, the Mini-T Front Springs are the better options.TRX4 - Upper and Lower CupCapra - Upper and Lower CupElement - Lower Cup Only (Shock Body is properly tapered to capture the Upper Spring) What Springs do I need? Mini-T/B Front (LOS214015 or LOSB1117) Spring or Rear (LOS214014 or LOSB1119) Springs depending on the length you have limited your shock stroke to. Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts. IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely. Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.
