Mini Wand Kit: Once the car has AirJax cylinders and plumbing, now the AirJax MiniWand comes into play. Simply connect the MiniWand to (dry!) air and then plug it into the car to activate your AirJax system. You can then close the valve and disconnect the hose and get the hose out of the way. Push-on for UP & Pull-off for Down. Includes: MiniWand itself is assembled with rapid-flow quick-connect to connect to your clean (no moisture!) air supply. It also has a 90 degree valve that you can slowly open to gently lower the car, or simply pull the MiniWand off the car for a faster drop. Also includes the rapid flow connector and car-side -6 bulkhead connector to plumb into your system. The main body of the MiniWand is surrounded by two oversize o-rings to eliminate contact with the body of the car if you set it down. Greatly reduced risk of scratches! NOTE - While we use traditional "1/4" size fittings, these are MUCH higher flowing. See the second image for a comparison from a standard fitting to the rapid-flow. Our rapid-flow version flow more than 3x the air of a standard fitting. This is critical to get good AirJax performance.
