Smartphone thermal camera with a manual-focus lens — sharp from 10 cm to across the room The HIKMICRO Mini2Plus V2 turns an iPhone, Android phone or tablet into a full 256 × 192 thermal camera. Where the standard Mini2 V2 uses a fixed-focus wide lens, the Mini2Plus V2 adds a manual-focus 25° lens, so it stays sharp on a single PCB component at close range and on a distribution board measured from a safe distance. It is powered entirely by the host device — nothing to charge, nothing to wait for, and it weighs 24 g. Key features 256 × 192 VOx detector — 49,152 measurement points with NETD < 40 mK, enough sensitivity to resolve temperature differences below 0.04 °C Manual focus lens — 25° × 18.8° field of view, minimum focus distance 0.1 m; the focus ring is what lets you work both close-up and at distance Macro capability — resolves detail down to roughly 340 µm when used with the optional desktop stand bracket, for component-level electronics work SuperIR image enhancement — applied to both live view and saved images for cleaner edges and easier interpretation −20 °C to 400 °C measurement range — accuracy ±2 °C (−20 °C to 100 °C) or ±2 % (100 °C to 400 °C) 25 Hz refresh rate — smooth panning and usable thermal video, not a stuttering frame every half second 3-in-1 connection — USB-C for Android and USB-C iPhones, plus an included Lightning-to-USB-C adapter for older iPhones Battery-free operation — 360 mW draw from the phone, so a day of intermittent inspection barely touches the handset's battery Built for the job site — IP40-rated aluminium alloy housing, tested to a 1 m drop Full measurement and reporting toolset — centre, hot and cold spot plus three user spots, three boxes and one line; HIKMICRO Viewer on mobile and HIKMICRO Analyzer on Windows for reports Typical applications Electrical panels, fuses, terminals and cable connections Component-level electronics and PCB fault finding HVAC and ventilation troubleshooting Building envelope surveys — insulation gaps, thermal bridges, air infiltration Underfloor heating loops and concealed pipework Damp and water ingress tracing Motor, bearing and drive-belt condition checks Solar PV panel hotspot inspection Technical specifications Detector type Uncooled VOx focal plane array IR resolution 256 × 192 (49,152 pixels) Detector pitch 12 µm Thermal sensitivity (NETD) < 40 mK (@ 25 °C, F#=1.0) Spectral range 7.5 to 14 µm Image frequency 25 Hz SuperIR Yes — live view and captured images Focal length / F-number 6.9 mm / F1.0 Field of view 25° × 18.8° Focus mode Manual Minimum focus distance 0.1 m Temperature range −20 °C to 400 °C Accuracy ±2 °C (−20 °C to 100 °C); ±2 % (100 °C to 400 °C) Measurement tools Centre spot, hot spot, cold spot; user-definable 3 spots, 3 rectangles, 1 line Level and span Auto / manual Colour palettes 12 — White Hot, Black Hot, Rainbow, Ironbow, Sepia, Color, Ice Fire, Rain, Red Hot, Green Hot, Dark Blue, Combined Image modes Thermal, visual (via phone camera) Interface USB-C (Android and iOS); Lightning via included adapter Device compatibility iOS 14 and later, Android 7 and later, Windows devices Software HIKMICRO Viewer (iOS/Android), HIKMICRO Analyzer (Windows) Power consumption 360 mW, supplied by the host device — no internal battery Protection level IP40 Drop test height 1 m Operating temperature −10 °C to 50 °C Storage temperature −20 °C to 60 °C Dimensions 26.6 × 26.6 × 25 mm Weight Approx. 24 g In the box HIKMICRO Mini2Plus V2 thermal module Extension cable Extended adapter for use with thick phone cases Lightning-to-USB-C adapter Protective case Quick start guide Model information Brand HIKMICRO Model Mini2Plus V2 Manufacturer part number (MPN) HM-TJ32-7RF-Mini2Plus V2
