An accurate, single-port Pulsation and Vacuum Tester using the same measurement system as the DairyTest range. A simple 3-digit display with function indicators is great for quick checks of Pulsator operation and vacuum levels. All Pulsation parameters are available in both % and ms where appropriate. Long battery life a fast operation make MiniTest and ideal unit to keep in the truck. Uses InnovAg’s digital calibration system with no manual adjustments for excellent long-term accuracy. Description Specifications FAQ Downloads Spares The MiniTest is a handheld single-port digital instrument for testing vacuum supplies and pulsators in dairies. With a large, easy-to-read 3-digit display, MiniTest uses the same high-accuracy analysis as our other testers, but in a smaller, lighter, lower-cost format.The MiniTest is intended for use by personnel with technical knowledge of dairy operation as an accessory to a professional test kit; for example, for bench-testing of pulsators or to do a quick check on the dairy’s performance. It is ideal for veterinarians and field professionals who need to check dairy operation without the cost or complexity of a fully featured tester.It has only a single vacuum port and cannot be connected to a PC or printer. MiniTest Kit contains: test tubing AA Alkaline batteries carry case manual Display:3 digit x 7 segment LCD Vacuum Maximum, average or minimum. Pulsation Ratios – A+B, B, C, D in % or ms Rate – CPM MaxVac B-Phase drop – B flashes if more than 4kPa drop in B-phase Stability – Avg flashes until values settle to ISO requirements Pulsation:Rate range: 40 to 500 CPM.Rate accuracy: ± 2%.Ratio accuracy: ± 2% of calculated value.Time (ms) accuracy: ± 2%.Vacuum:Range: +10 to -80 kPa at 1 atm.Accuracy: ± 0.5 kPaRepeatability: ± 0.3 kPaResolution: 0.1 kPa General:Sample rate: 1000 samples/sec.Operating temperature: 5 to 40°CStorage temperature: 0 to 60°CAutomatic turn-off time: 10 minutes after last key pressif no vacuum on port.Batteries: two ‘AA’ Alkaline or NiCd/NiMH rechargeable cells.Specifications are subject to change without notice.ALL InnovAg testers include: Digital calibration with certificate supplied. Re-calibration service available. Selectable units: Vacuum – kPa & inHg, Pulsation ratios (where included) – % and ms. Pulsation measurements (where included) conform to ISO standard with stability indication. Auto power off and low battery indication. Automatic vacuum zero (with manual zero if required). Why is the VAC/PUL light flashing?The batteries are getting low. How do I reset the MiniTest's zero?Turn the unit on. Select VAC mode.Press and hold the VAC/PUL key. After about 5 seconds both the VAC or PUL lights will turn on. Do not release the key yet. Press both the I/O and the play key. The PUL light should go off indicating the manual zero has been accepted. Release all keys and check the display shows 0.0. What if I need to return my product?Please complete the contact form so that innovAg may help you with your concern. Pulsation test tubing (white) Internal tube & filter kit
