The Miter Marker is a compact form of the Master Marker. It is a unique layout tool for pipe and structural steel. Learn How to Use the Miter Marker Featuring a New On/Off Switchable Magnet The Miter Marker quickly marks pipe from 1-1/2" to 18". Magnetic base, with levels, help the operator to stabilize tool and quickly find top dead center of the pipe. Removable and completely adjustable head, with a built in level, gives the operator the ability to mark both sides of a pipe without resetting the angle because the head can rotate 360 degrees . Because the head rotates, the operator is not limited by pipe size if you need to move the base for continuous marking. The arms have spring-loaded joints for smooth and precise operation for years of trouble-free service. The Miter Marker sets the standard for marking pipe saddles and structural steel layout. The Miter Marker comes standard with a structural steel adapter and strap (for non-ferrous pipe). Levels are easily replaced if broken. It is machined from quality aluminum material then anodized for lasting protection. The Miter Marker comes in a case with foam cut-outs for storage. A must have for the professional. Frequently Asked Questions Question: How much holding power does the on/off magnet have? Answer: 150 lbs. of power on both tools. Question: What material are tools made from? Answer: Aluminum that's anodized for protection. Question: What size or type of joint, elbow, tee or lateral or angle, will the Miter Marker work on? Answer: The Miter Marker size range is 1-1/2" to 18" pipe and/or structural steel joints. Will layout all types of joints, elbows, tees or laterals at any angle. FOR LARGER JOBS, ORDER THE MASTER MARKER. Question: Is the Miter Marker furnished with a protractor and, if so, is it calibrated? Answer: The Miter Marker has calibrated protractor dials. Question: Is the Miter Marker furnished with triple-jointed marking arms and holder for soapstone crayon? Answer: Yes. Question: Does the Miter Marker come furnished with a structural adapter that will simplify the layout of I-beams, angles and channels? Answer: Yes. Question: What degree readings will the protractor do and in what increments? Answer: The protractor will read to 90° in 2-1/2 degree increments for easy reading. Question: Will the protractor also do readings in rise-inches-per-foot? Answer: Yes. Question: Does the Miter Marker come with built-in adjustable dial protractor and bubble level? If yes, what will it read up to and in what degree increments? Answer: NO! The level is stationary in the main body for top "dead center" readings and more importantly, there is a level vial in the marking arm which is on a 360 degree rotating shaft. This allows the operator to telescope out over old welds or change the angle on fittings to whatever angle is needed. NOTE: The marking arm for the Master Marker is completely separate from the main body. This allows you to move the main magnetic body anywhere around the circumference of the pipe and re-level the marking arm. By doing this you are ready to continue marking for larger pipe. It will mark angles or simple and compound saddles on any size pipe. This main base is magnetic. The level vials and the adaptors are built in. No extras to buy! The vials (part number 5111) can be repaired easily in the field. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "How much holding power does the on/off magnet have?", "acceptedAnswer": { "@type": "Answer", "text": "150 lbs. of power on both tools." } },{ "@type": "Question", "name": "What material are tools made from?", "acceptedAnswer": { "@type": "Answer", "text": "Aluminum that's anodized for protection." } },{ "@type": "Question", "name": "What size or type of joint, elbow, tee or lateral or angle, will the Miter Marker work on?", "acceptedAnswer": { "@type": "Answer", "text": "The Miter Marker size range is 1-1/2\" to 18\" pipe and/or structural steel joints. Will layout all types of joints, elbows, tees or laterals at any angle. FOR LARGER JOBS, ORDER THE MASTER MARKER." } },{ "@type": "Question", "name": "Is the Miter Marker furnished with a protractor and, if so, is it calibrated?", "acceptedAnswer": { "@type": "Answer", "text": "The Miter Marker has calibrated protractor dials." } },{ "@type": "Question", "name": "Is the Miter Marker furnished with triple-jointed marking arms and holder for soapstone crayon?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "Does the Miter Marker come furnished with a structural adapter that will simplify the layout of I-beams, angles and channels?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "What degree readings will the protractor do and in what increments?", "acceptedAnswer": { "@type": "Answer", "text": "The protractor will read to 90° in 2-1/2 degree increments for easy reading." } },{ "@type": "Question", "name": "Will the protractor also do readings in rise-inches-per-foot?", "acceptedAnswer": { "@type": "Answer", "text": "Yes." } },{ "@type": "Question", "name": "Does the Miter Marker come with built-in adjustable dial protractor and bubble level? If yes, what will it read up to and in what degree increments?", "acceptedAnswer": { "@type": "Answer", "text": "NO! The level is stationary in the main body for top \"dead center\" readings and more importantly, there is a level vial in the marking arm which is on a 360 degree rotating shaft. This allows the operator to telescope out over old welds or change the angle on fittings to whatever angle is needed." } }] }
