The MKS CANable V1.0 module is an upgraded version of the CANable, capable of communication at data rates up to 1Mbit/s in the fast phase of CAN, making it ideal for product debugging, CAN bus control, and high-speed CAN applications in the automotive industry. The MKS CANable Pro V1.0 module is a further enhanced version of the MKS CANable V1.0, featuring high-speed transmission rates and exceptional operational stability. Additionally, it offers stronger anti-interference capabilities, making it highly suitable for industrial debugging or motor-related applications. Product Features Both the MKS CANable V1.0 and MKS CANable Pro V1.0 modules use a high-performance ARM Cortex-M0 STM32F072C8T6 processor, running at a frequency of up to 48 MHz. The MKS CANable V1.0 communication chip uses the highly integrated TJA1051T/3, with a CAN data rate of up to 1 Mbit/s. The MKS CANable Pro V1.0 features the ADM3053BRWZ fully isolated chip, offering high common-mode transient immunity of over 25 kV/μs, which enhances anti-interference performance. The MKS CANable V1.0 supports up to 32 devices connected to a PC simultaneously. The MKS CANable Pro V1.0 can support 110 or more nodes on the bus, with inactive nodes not affecting the bus. The MKS CANable V1.0 is disconnected from the bus (zero load) when not powered. The MKS CANable Pro V1.0 provides 2.5kVrms signal and power isolation. It uses the LP5907MFX-3.3 low-noise LDO voltage regulator chip, with an output current of up to 250mA. Features thermal shutdown protection. Powered and communicates via USB interface. No drivers are required for Windows or Linux systems. Parameters Mainboard Model: MKS CANable Microprocessor: STM32F072C8T6 microprocessor Communication Chip: TJA1051T/3 chip Input Voltage: DC 3.3V-5V Output Current: 250mA Maximum Nodes: 32 Transmission Rate: 1Mbps Operating Temperature: -40°C to +150°C PCB Dimensions: 16mm x 40mm x 1.6mm
