Mobula8 (Analog)

Tiny Whoop Verified independent store

→

You can pick up extra propellers HERE Features X12 AIO flight controller w/ built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw ELRS V2.0 (Default), provides firmware to supp ort ELRS V3.0 Smooth and powerful Compatible with 1S-2S Lipo/LIHV battery Recommend 2S 450mah/550mah/650mah battery (Not included) Specifications Brand Name: Happymodel Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone Wheelbase: 85mm Size: 120mm*120mm*50mm X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw ELRS V2.0 (Default), provides firmware to support ELRS V3.0 EX1103 KV110000 motors CaddxFPV Ant FPV camera Weight: 43g AIO Flight Controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) BLHeli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor AIO 4-in-1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Support Bluejay firmware Receiver option: 2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0) SPI Frsky D8/D16 not compatible with EMAX E6 radio PNP (without onboard receiver) TBS version(with external TBS CRSF NANO RX) Motor Mode: EX1103 KV11000 Configuration: 9N12P Stator Diameter: 11mm Stator Length: 3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm Weight(g): 3.8g No. of Cells(Lipo): 1-2S Propellers Weight: 0.88g Material: PC Pitch: 2.3inch Props Diameter: 52.17mm Center Thickness: 5mm Center Hole Diameter: 1.5mm Caddx ANT 1200TVL Camera Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: [email protected] Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.) Recommended (Not Included) 2S 450mah/550mah/650mah battery (Not included) Includes 1 x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone - Chosen Receiver 1 x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW) 1 x Screw Driver 1 x Extra camera canopy Show more